NES 2.0 Mapper 267: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Created page with "Category:MMC3-like mappersCategory:Multicart mappers NES 2.0 Mapper 267 is used for the 8-in-1 JY-119 multicart. It consists of an MMC3 clone with an outer bank re...")
 
m (defaultsort)
 
(One intermediate revision by one other user not shown)
Line 1: Line 1:
[[Category:MMC3-like mappers]][[Category:Multicart mappers]]
{{DEFAULTSORT:267}}[[Category:MMC3-like mappers]][[Category:Multicart mappers]]
NES 2.0 Mapper 267 is used for the 8-in-1 JY-119 multicart. It consists of an [[MMC3]] clone with an outer bank register at $6000.
NES 2.0 Mapper 267 is used for the 8-in-1 JY-119 multicart. It consists of an [[MMC3]] clone with an outer bank register at $6000.


==MMC3-compatible registers==
==MMC3-compatible registers==
Mask: $E011
Mask: $E001
* $8000, $8001, $A000, $A001, $C000, $C001, $E000, $E001: As normal [[MMC3]]. Inner PRG banks are limited to 256 KiB, Inner CHR banks to 128 KiB.
* $8000, $8001, $A000, $A001, $C000, $C001, $E000, $E001: As normal [[MMC3]]. Inner PRG banks are limited to 256 KiB, Inner CHR banks to 128 KiB.



Latest revision as of 06:36, 26 May 2020

NES 2.0 Mapper 267 is used for the 8-in-1 JY-119 multicart. It consists of an MMC3 clone with an outer bank register at $6000.

MMC3-compatible registers

Mask: $E001

  • $8000, $8001, $A000, $A001, $C000, $C001, $E000, $E001: As normal MMC3. Inner PRG banks are limited to 256 KiB, Inner CHR banks to 128 KiB.

Outer Bank ($6000)

Mask: Unknown

7654 3210
---- ----
UUB. .BB.
||+---++-- Select 256 KiB outer PRG-ROM and 128 KiB outer CHR-ROM bank
++-------- Unknown, cleared when the menu is shown, both set once a game has been selected.

Notes

  • The initial value of this register must be $00 for the multicart menu to be shown.
  • The cart seems to run just fine when ignoring the two unknown bits.