Taito TC0190 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (typo) |
m (35, 36 no internal connection. 20, 31 internally both ground) |
||
| (5 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Pinouts]] | [[Category:Pinouts]] | ||
Taito TC0190: 0.6" high-density PDIP (Canonically [[iNES Mapper 033]]) | Taito TC0190: 0.6" 40-pin high-density PDIP (Canonically [[iNES Mapper 033]]) | ||
.--\/--. | .--\/--. | ||
( | (fr) CPU D0 -> |01 40| -- Vcc | ||
( | (fr) CPU D1 -> |02 39| <- R/W (f) | ||
( | (fr) CPU D2 -> |03 38| <- /ROMSEL (f) | ||
( | (fr) CPU D3 -> |04 37| <- M2 (f) | ||
( | (fr) CPU D4 -> |05 36| -- n/c | ||
( | (fr) CPU D5 -> |06 35| -- n/c | ||
( | (fr) CPU D6 -> |07 34| <- PPU A10 (f) | ||
( | (fr) CPU D7 -> |08 33| <- PPU A11 (f) | ||
(r) PRG A13 <- |09 32| <- PPU A12 ( | (r) PRG A13 <- |09 32| <- PPU A12 (f) | ||
(r) PRG A14 <- |10 31| | (r) PRG A14 <- |10 31| -- GND | ||
(r) PRG A15 <- |11 30| -> CIRAM A10 ( | (r) PRG A15 <- |11 30| -> CIRAM A10 (f) | ||
(r) PRG A16 <- |12 29| -> CHR A10 (r) | (r) PRG A16 <- |12 29| -> CHR A10 (r) | ||
(r) PRG A17 <- |13 28| -> CHR A11 (r) | (r) PRG A17 <- |13 28| -> CHR A11 (r) | ||
(r) PRG A18 <- |14 27| -> CHR A12 (r) | (r) PRG A18 <- |14 27| -> CHR A12 (r) | ||
( | (fr) CPU A0 -> |15 26| -> CHR A13 (r) | ||
( | (fr) CPU A1 -> |16 25| -> CHR A14 (r) | ||
( | (f) CPU A13 -> |17 24| -> CHR A15 (r) | ||
( | (f) CPU A14 -> |18 23| -> CHR A16 (r) | ||
(r) PRG /CE <- |19 22| -> CHR A17 (r) | (r) PRG /CE <- |19 22| -> CHR A17 (r) | ||
GND -- |20 21| | GND -- |20 21| -> CHR A18 (r) | ||
'------' | '------' | ||
| Line 31: | Line 31: | ||
PAL16R4 | PAL16R4 | ||
--\/-- | --\/-- | ||
( | (f) /ROMSEL -> |01 20| -- Vcc | ||
( | (f) /ROMSEL -> |02 19| -> CIRAM A10 (f) | ||
( | (f) R/W -> |03 18| ?? NC | ||
( | (f) CPU A14 -> |04 17| -> NC (latched value written to D6) | ||
( | (f) CPU A13 -> |05 16| -> NC | ||
( | (fr) CPU A1 -> |06 15| -> NC | ||
( | (fr) CPU A0 -> |07 14| -> NC | ||
( | (f) PPU A11 -> |08 13| <- CPU D6 (fr) | ||
( | (f) PPU A10 -> |09 12| -> to TC0190 pin 38 | ||
GND -- |10 11| <- GND (PAL /OE signal) | GND -- |10 11| <- GND (PAL /OE signal) | ||
------ | ------ | ||
[[wikipedia:Programmable_Array_Logic|PAL]]s allow the programming of arbitrary logic functions, but in the PAL16R4, pins 1 and 11 have fixed functionality. This is why /ROMSEL is connected to both pins 1 and pin 2: pin 1 can ''only'' be used as a clock input to latch the value of D6, but /ROMSEL is also connected to pin 2 so that the PAL can fail to pass through the write to the TC0190 when the CPU writes to $E000. | [[wikipedia:Programmable_Array_Logic|PAL]]s allow the programming of arbitrary logic functions, but in the PAL16R4, pins 1 and 11 have fixed functionality. This is why /ROMSEL is connected to both pins 1 and pin 2: pin 1 can ''only'' be used as a clock input to latch the value of D6, but /ROMSEL is also connected to pin 2 so that the PAL can fail to pass through the write to the TC0190 when the CPU writes to $E000. | ||
Latest revision as of 21:46, 18 February 2020
Taito TC0190: 0.6" 40-pin high-density PDIP (Canonically iNES Mapper 033)
.--\/--.
(fr) CPU D0 -> |01 40| -- Vcc
(fr) CPU D1 -> |02 39| <- R/W (f)
(fr) CPU D2 -> |03 38| <- /ROMSEL (f)
(fr) CPU D3 -> |04 37| <- M2 (f)
(fr) CPU D4 -> |05 36| -- n/c
(fr) CPU D5 -> |06 35| -- n/c
(fr) CPU D6 -> |07 34| <- PPU A10 (f)
(fr) CPU D7 -> |08 33| <- PPU A11 (f)
(r) PRG A13 <- |09 32| <- PPU A12 (f)
(r) PRG A14 <- |10 31| -- GND
(r) PRG A15 <- |11 30| -> CIRAM A10 (f)
(r) PRG A16 <- |12 29| -> CHR A10 (r)
(r) PRG A17 <- |13 28| -> CHR A11 (r)
(r) PRG A18 <- |14 27| -> CHR A12 (r)
(fr) CPU A0 -> |15 26| -> CHR A13 (r)
(fr) CPU A1 -> |16 25| -> CHR A14 (r)
(f) CPU A13 -> |17 24| -> CHR A15 (r)
(f) CPU A14 -> |18 23| -> CHR A16 (r)
(r) PRG /CE <- |19 22| -> CHR A17 (r)
GND -- |20 21| -> CHR A18 (r)
'------'
Some boards added a PAL to the TC0190. As far as we can tell, the only purpose of the PAL was to move the mirroring control bit. This becomes a subset of iNES Mapper 048 instead:
TC0190 pin 30: (was CIRAM A10) now NC
TC0190 pin 38: (was /ROMSEL) now from PAL pin 12
PAL16R4
--\/--
(f) /ROMSEL -> |01 20| -- Vcc
(f) /ROMSEL -> |02 19| -> CIRAM A10 (f)
(f) R/W -> |03 18| ?? NC
(f) CPU A14 -> |04 17| -> NC (latched value written to D6)
(f) CPU A13 -> |05 16| -> NC
(fr) CPU A1 -> |06 15| -> NC
(fr) CPU A0 -> |07 14| -> NC
(f) PPU A11 -> |08 13| <- CPU D6 (fr)
(f) PPU A10 -> |09 12| -> to TC0190 pin 38
GND -- |10 11| <- GND (PAL /OE signal)
------
PALs allow the programming of arbitrary logic functions, but in the PAL16R4, pins 1 and 11 have fixed functionality. This is why /ROMSEL is connected to both pins 1 and pin 2: pin 1 can only be used as a clock input to latch the value of D6, but /ROMSEL is also connected to pin 2 so that the PAL can fail to pass through the write to the TC0190 when the CPU writes to $E000.
