PowerPak: Difference between revisions
Rainwarrior (talk | contribs) (loopy mappers info update) |
Rainwarrior (talk | contribs) m (→Loopy's Mappers: link fixes) |
||
| Line 44: | Line 44: | ||
* [[BxROM]] ([[iNES Mapper 034|34]]) | * [[BxROM]] ([[iNES Mapper 034|34]]) | ||
* [[Codemasters]] ([[iNES Mapper 071|71]]) | * [[Codemasters]] ([[iNES Mapper 071|71]]) | ||
* [[iNES Mapper 090| | * [[JY Company]] ([[iNES Mapper 090|90]], partial) | ||
* [[MMC5]] ([[iNES Mapper 005|5]], no sound) | * [[MMC5]] ([[iNES Mapper 005|5]], no sound) | ||
Revision as of 07:06, 29 July 2015
PowerPak emulates mappers used in NES games, but not always perfectly.
Power Mappers
TheFox created a set of revised PowerPak mappers to supplement or augment the existing ones, most notably adding a savestate feature.
Download: http://kkfos.aspekt.fi/projects/nes/powerpak/powermappers/
- NROM (0)
- AxROM (7)
- BxROM (34)
- CxROM (3)
- GxROM (66)
- UxROM (2)
- MMC1 (1)
- MMC2 (9)
- MMC3 (4)
- MMC3/TxSROM (118)
- MMC3/TQROM (119)
- MMC4 (10)
- FME-7 (69, no sound)
- Codemasters (71)
- ColorDreams (11)
Known problems:
- MMC3 IRQ can cause shaky status bars and similar problems on some systems.
Loopy's Mappers
Loopy released a set of revised PowerPak mappers in 2011, adding fixes and additional support for a several mappers:
Download:https://home.comcast.net/~olimar/NES/powerpak_loopy.zip
- CNROM (3)
- MMC3 (4)
- FDS
- NSF
- VRC4 (21, 23, 25)
- VRC6 (24, 26)
- N163 (19)
- Sunsoft-5B (69)
- BxROM (34)
- Codemasters (71)
- JY Company (90, partial)
- MMC5 (5, no sound)
Problems in Offical Mappers V1.34
To do.
Fixed in Mappers V1.11
iNES 4 - MMC3 - fixed bad irq iNES 9 - MMC2 - fixed bad chr switch iNES 64 - Rambo 1 - mostly fixed bad irq iNES 119 - TQROM (MMC3 + 74HC32) - fixed bad chr switch
iNES 3 - CNROM and clones - limited CHR size
CNROM supports up to four banks (32 KiB) of CHR ROM. PowerPak uses the bank number mod 4. This breaks Panesian games that use a compatible board that supports larger CHR ROMs but is otherwise functionally identical to CNROM.
iNES 4 - MMC3 - no wram disable
Older versions of MMC3 would corrupt PRG RAM when turning IRQs on or off because writes to $E000-$FFFF also went to $6000-$7FFF.
Low G Man needs WRAM disabled. There are two ways to disable it, but the PowerPak supports neither.
- Low G Man disables WRAM during its startup code by writing a value less than $80 to $A001. But the PowerPak's MMC3 ignores $A001 writes entirely as a hack that lets it run StarTropics, whose MMC6 has a different disable method.
- NES 2.0 allows specifying no WRAM at all, but the PowerPak ignores all additional NES 2.0 fields.
iNES 5 - MMC5 - known bad
Games will not start, mapper not complete yet.
iNES 71 - Camerica
Micro Machines has major graphics problems, could be FPGA pins are wrong.
Fire Hawk and Fantastic Adventures of Dizzy show the same problem.
Many of these are very likely bad roms.
