INES Mapper 045: Difference between revisions
NewRisingSun (talk | contribs) |
NewRisingSun (talk | contribs) (Add other menu selection mechanism) |
||
Line 57: | Line 57: | ||
Writing any value to $6001 (mask: $F001) resets the outer bank registers as a soft reset would, clearing the "Lock" bit and making the next write to $6000 go to register #0. | Writing any value to $6001 (mask: $F001) resets the outer bank registers as a soft reset would, clearing the "Lock" bit and making the next write to $6000 go to register #0. | ||
== | ==Menu Selection #1 ($5000-$5FFF, read)== | ||
The ''超强年度新卡 (Super New Year Cart) 15-in-1'' multicart has a DIP switch whose setting causes the menu program to select one of eight different menus. | The ''超强年度新卡 (Super New Year Cart) 15-in-1'' multicart has a DIP switch whose setting causes the menu program to select one of eight different menus. | ||
A~FEDC BA98 7654 3210 D~7654 3210 | A~FEDC BA98 7654 3210 D~7654 3210 | ||
Line 67: | Line 67: | ||
* If the dip switch is in the "1" position, reads from $5020 return with D0 set while reads from $5010, $5040...$5800 return with D0 clear. | * If the dip switch is in the "1" position, reads from $5020 return with D0 set while reads from $5010, $5040...$5800 return with D0 clear. | ||
* If the dip switch is in the "7" position, reads from $5800 return with D0 set while reads from $5010, $5020...$5400 return with D0 clear. | * If the dip switch is in the "7" position, reads from $5800 return with D0 set while reads from $5010, $5020...$5400 return with D0 clear. | ||
==Menu Selection #2== | |||
Some multicarts select between five different menus by connecting one of the higher address lines to PRG /CE. The menu code selects between menus by checking which of the higher address lines disables PRG-ROM when set. | |||
Selection 0: No address line connected to PRG /CE | |||
Selection 1: PRG A20 connected to PRG /CE | |||
Selection 2: CHR A20 connected to PRG /CE | |||
Selection 3: PRG A19 connected to PRG /CE | |||
Selection 4: CHR A19 connected to PRG /CE | |||
Cartridges with 1 MiB of PRG-/CHR-ROM cannot use selections 3/4, cartridges with 2 MiB of more of PRG-/CHR-ROM cannot use this menu selection mechanism. | |||
=Notes= | =Notes= | ||
* Some multicart menus write the same values to the outer bank registers multiple times. Experiments during dumping do not suggest that this is necessary. | * Some multicart menus write the same values to the outer bank registers multiple times. Experiments during dumping do not suggest that this is necessary. | ||
* NES 2.0 Mappers [[NES 2.0 Mapper 356|356]], [[NES 2.0 Mapper 372|372]] and [[NES 2.0 Mapper 373|373]] repurpose bits from outer bank register #2 for other things. | * NES 2.0 Mappers [[NES 2.0 Mapper 356|356]], [[NES 2.0 Mapper 372|372]] and [[NES 2.0 Mapper 373|373]] repurpose bits from outer bank register #2 for other things. | ||
* [[NES 2.0 Mapper 269]] is an enhanced plug-and-play console variant of this mapper. | * [[NES 2.0 Mapper 269]] is an enhanced plug-and-play console variant of this mapper. |
Latest revision as of 21:03, 23 February 2022
iNES Mapper 045 denotes multicart PCBs using the GA23C ASIC in its standard configuration. It is an MMC3 clone with four outer bank registers.
Registers
The four outer bank registers are accessed at address $6000. The first write goes to the first register, the second write to the second, and so on; the fifth write goes to the first register again. The outer bank registers overlay WRAM and function regardless of the MMC3's WRAM bits' setting.
MMC3-compatible registers
- Bank select ($8000-$9FFE, even)
- Bank data ($8001-$9FFF, odd)
- Mirroring ($A000-$BFFE, even)
- PRG RAM protect ($A001-$BFFF, odd)
- IRQ latch ($C000-$DFFE, even)
- IRQ reload ($C001-$DFFF, odd)
- IRQ disable ($E000-$FFFE, even)
- IRQ enable ($E001-$FFFF, odd)
These registers function identically to the MMC3, with the PRG/CHR bank registers subject to masking by the outer bank registers.
CHR-OR LSB ($6000 #0, write)
Mask: $F001 D~7654 3210 --------- CCCC CCCC ++++-++++- Select CHR A10-A17, OR'd with MMC3's CHR A10-A17 masked according to CHR-AND
PRG-OR LSB ($6000 #1, write)
Mask: $F001 D~7654 3210 --------- ppPP PPPP ||++-++++- Select PRG A13-A18, OR'd with MMC3's PRG A13-A18 masked according to PRG-AND ++-------- Select PRG A19-A20
CHR-AND, CHR-OR/PRG-OR MSB ($6000 #2, write)
Mask: $F001 D~7654 3210 --------- PPCC cccc |||| ++++- Select number of CHR bits from MMC3 |||| ($F: 256 KiB, $E: 128 KiB ... $7-$0: 1 KiB) ||++------ Select CHR A18-A19 ++-------- Select CHR A20-A21 and PRG A21-22
PRG-AND, register lock ($6000 #3, write)
Mask: $F001 D~7654 3210 --------- 1LPP PPPP |++ ++++- Select PRG-AND mask (inverted) ||| ($00: 512 KiB, $20: 256 KiB...) +-------- 1=Lock outer bank registers
Reset outer bank registers and release lock ($6001, write)
Writing any value to $6001 (mask: $F001) resets the outer bank registers as a soft reset would, clearing the "Lock" bit and making the next write to $6000 go to register #0.
Menu Selection #1 ($5000-$5FFF, read)
The 超强年度新卡 (Super New Year Cart) 15-in-1 multicart has a DIP switch whose setting causes the menu program to select one of eight different menus.
A~FEDC BA98 7654 3210 D~7654 3210 ------------------- --------- 0101 AAAA AAAA .... .... ...D ++++-++++-----------------+- 1=If DIP switch is in the position selected by the corresponding A bit
This means that:
- If the dip switch is in the "0" position, reads from $5010 return with D0 set while reads from $5020, $5040...$5800 return with D0 clear.
- If the dip switch is in the "1" position, reads from $5020 return with D0 set while reads from $5010, $5040...$5800 return with D0 clear.
- If the dip switch is in the "7" position, reads from $5800 return with D0 set while reads from $5010, $5020...$5400 return with D0 clear.
Menu Selection #2
Some multicarts select between five different menus by connecting one of the higher address lines to PRG /CE. The menu code selects between menus by checking which of the higher address lines disables PRG-ROM when set.
Selection 0: No address line connected to PRG /CE Selection 1: PRG A20 connected to PRG /CE Selection 2: CHR A20 connected to PRG /CE Selection 3: PRG A19 connected to PRG /CE Selection 4: CHR A19 connected to PRG /CE
Cartridges with 1 MiB of PRG-/CHR-ROM cannot use selections 3/4, cartridges with 2 MiB of more of PRG-/CHR-ROM cannot use this menu selection mechanism.
Notes
- Some multicart menus write the same values to the outer bank registers multiple times. Experiments during dumping do not suggest that this is necessary.
- NES 2.0 Mappers 356, 372 and 373 repurpose bits from outer bank register #2 for other things.
- NES 2.0 Mapper 269 is an enhanced plug-and-play console variant of this mapper.