2A03: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Improves the opening line of the article. Removes unnecessary and incorrect 2A03/2A07 revision references.)
 
(12 intermediate revisions by 9 users not shown)
Line 1: Line 1:
The '''2A03''', short for RP2A03[G], is the common name of the NTSC [[CPU|NES CPU]] chip. It consists of a MOS Technology 6502 processor (lacking decimal mode) and audio generation logic.
The [[2A03]], short for RP2A03, is the common name of the NTSC [[CPU|NES CPU]] chip. It consists of a MOS Technology 6502 processor (lacking decimal mode) and audio, joypad, and DMA functionality. PAL systems use the similar RP2A07, which has a different clock rate, adjusted sampled audio rates, and DMA bugfixes.
The 2A03 is used only in NTSC consoles; PAL systems are equipped with an RP2A07G chip, whose only major changes are a different clock divider (divide by 16 instead of 12) and adjusted PCM playback speeds.


== 2A03 register map ==
== 2A03 register map ==
In addition to the registers in the 6502 core, the 2A03 contains 22 memory-mapped registers for sound generation (see [[APU|NES APU]]), joystick reading, and OAM transfer. Unlike the addresses of [[PPU]] registers and [[MMC|mapper]] registers, CPU register addresses are completely decoded, which means that the entire space from the end of CPU registers to the top of address space ($4018 through $FFFF) is available to the Game Pak.
In addition to the registers in the 6502 core, the 2A03 contains 22 memory-mapped registers for sound generation (see [[APU|NES APU]]), joystick reading, and OAM DMA transferring. Unlike the addresses of [[PPU]] registers and [[MMC|mapper]] registers, CPU register addresses are completely decoded, which means that the entire space from the end of CPU registers to the top of address space ($4020 through $FFFF) is available to the Game Pak.


{| border=1
The range $4018-$401F does nothing on a retail NES. It was intended for 2A03 functionality that never made it to production. Various revisions of the 2A03 include [[CPU Test Mode|test registers]] (which are disabled in normal operation) or [[RP2A03 Programmable Interval Timer|remnants of an incompletely implemented IRQ counter]] that was disconnected from the rest of the circuit. Mappers can place writable registers here without conflicting with the 2A03, but placing readable registers here should be avoided because of [[DMA#Register_conflicts|conflicts with DMA]].
|$4000||SQ1_VOL||Duty and volume for [[APU Pulse|square wave 1]]
 
{| class="wikitable"
!Address || Name || colspan=2 | Write || Read
|-
|$4000 || SQ1_VOL || rowspan=4 | [[APU Pulse|Pulse 1]] || Duty cycle and [[APU Envelope|volume]] || rowspan=21 | [[Open bus]]
|-
|$4001 || SQ1_SWEEP || [[APU Sweep|Sweep control register]]
|-
|$4002 || SQ1_LO || Low byte of period
|-
|-
|$4001||SQ1_SWEEP||Sweep control register for square wave 1
|$4003 || SQ1_HI || High byte of period and [[APU Length Counter|length counter value]]
|-
|-
|$4002||SQ1_LO||Low byte of period for square wave 1
|$4004 || SQ2_VOL || rowspan=4 | [[APU Pulse|Pulse 2]] || Duty cycle and [[APU Envelope|volume]]
|-
|-
|$4003||SQ1_HI||High byte of period and length counter value for square wave 1
|$4005 || SQ2_SWEEP || [[APU Sweep|Sweep control register]]
|-
|-
|$4004||SQ2_VOL||Duty and volume for [[APU Pulse|square wave 2]]
|$4006 || SQ2_LO || Low byte of period
|-
|-
|$4005||SQ2_SWEEP||Sweep control register for square wave 2
|$4007 || SQ2_HI || High byte of period and [[APU Length Counter|length counter value]]
|-
|-
|$4006||SQ2_LO||Low byte of period for square wave 2
|$4008 || TRI_LINEAR || rowspan=4 | [[APU Triangle|Triangle]] || Linear counter
|-
|-
|$4007||SQ2_HI||High byte of period and length counter value for square wave 2
|$4009 || || Unused
|-
|-
|$4008||TRI_LINEAR||[[APU Triangle|Triangle wave]] linear counter
|$400A || TRI_LO || Low byte of period
|-
|-
|$4009||||(Not used)
|$400B || TRI_HI || High byte of period and [[APU Length Counter|length counter value]]
|-
|-
|$400A||TRI_LO||Low byte of period for triangle wave
|$400C || NOISE_VOL || rowspan=4 | [[APU Noise|Noise]] || [[APU Envelope|Volume]]
|-
|-
|$400B||TRI_HI||High byte of period and length counter value for triangle wave
|$400D || || Unused
|-
|-
|$400C||NOISE_VOL||Volume for [[APU Noise|noise generator]]
|$400E || NOISE_LO || Period and waveform shape
|-
|-
|$400D||||(Not used)
|$400F || NOISE_HI || [[APU Length Counter|Length counter value]]
|-
|-
|$400E||NOISE_LO||Period and waveform shape for noise generator
|$4010 || DMC_FREQ || rowspan=4 | [[APU DMC|DMC]] || IRQ flag, loop flag and frequency
|-
|-
|$400F||NOISE_HI||Length counter value for noise generator
|$4011 || DMC_RAW || 7-bit DAC
|-
|-
|$4010||DMC_FREQ||Play mode and frequency for [[APU DMC|DMC samples]]
|$4012 || DMC_START || Start address = $C000 + $40*$xx
|-
|-
|$4011||DMC_RAW||7-bit DAC
|$4013 || DMC_LEN || Sample length = $10*$xx + 1 bytes (128*$xx + 8 samples)
|-
|-
|$4012||DMC_START||Start of DMC waveform is at address $C000 + 64*x
|$4014 || OAMDMA || colspan=2 | [[OAMDMA|OAM DMA]]: Copy 256 bytes from $xx00-$xxFF into OAM via [[OAMDATA]] ($2004)
|-
|-
|$4013||DMC_LEN||Length of DMC waveform is 16*x + 1 bytes (128*x + 8 samples)
|$4015 || SND_CHN || colspan=2 | [[APU Status|Sound channels enable]] || [[APU Status|Sound channel and IRQ status]]
|-
|-
|$4014||OAM_DMA||Writing x here copies 256 bytes from $xx00-$xxFF to $2004 ([[NES PPU|OAM]] data)
|$4016 || JOY1 || colspan=2 | [[Input devices|Joystick strobe]] || [[Input devices|Joystick 1 data]]
|-
|-
|$4015||SND_CHN||[[APU Status|Sound channels enable and status]]
|$4017 || JOY2 || colspan=2 | [[APU Frame Counter|Frame counter]] control || [[Input devices|Joystick 2 data]]
|-
|-
|$4016||JOY1||[[Controller Port|Joystick 1 data (R) and joystick strobe (W)]]
|colspan="2" | $4018-$401A || colspan=3 | APU test functionality that is normally disabled. See [[CPU Test Mode]].
|-
|-
|$4017||JOY2||Joystick 2 data (R) and [[APU Frame Counter|frame counter]] control (W)
|colspan="2" | $401C-$401F || colspan=3 | Unfinished IRQ timer functionality that is always disabled. See [[RP2A03 Programmable Interval Timer]].
|}
|}


==See also==
==See also==
*[[CPU|NES CPU]]
*[[CPU|NES CPU]]

Latest revision as of 20:34, 8 October 2023

The 2A03, short for RP2A03, is the common name of the NTSC NES CPU chip. It consists of a MOS Technology 6502 processor (lacking decimal mode) and audio, joypad, and DMA functionality. PAL systems use the similar RP2A07, which has a different clock rate, adjusted sampled audio rates, and DMA bugfixes.

2A03 register map

In addition to the registers in the 6502 core, the 2A03 contains 22 memory-mapped registers for sound generation (see NES APU), joystick reading, and OAM DMA transferring. Unlike the addresses of PPU registers and mapper registers, CPU register addresses are completely decoded, which means that the entire space from the end of CPU registers to the top of address space ($4020 through $FFFF) is available to the Game Pak.

The range $4018-$401F does nothing on a retail NES. It was intended for 2A03 functionality that never made it to production. Various revisions of the 2A03 include test registers (which are disabled in normal operation) or remnants of an incompletely implemented IRQ counter that was disconnected from the rest of the circuit. Mappers can place writable registers here without conflicting with the 2A03, but placing readable registers here should be avoided because of conflicts with DMA.

Address Name Write Read
$4000 SQ1_VOL Pulse 1 Duty cycle and volume Open bus
$4001 SQ1_SWEEP Sweep control register
$4002 SQ1_LO Low byte of period
$4003 SQ1_HI High byte of period and length counter value
$4004 SQ2_VOL Pulse 2 Duty cycle and volume
$4005 SQ2_SWEEP Sweep control register
$4006 SQ2_LO Low byte of period
$4007 SQ2_HI High byte of period and length counter value
$4008 TRI_LINEAR Triangle Linear counter
$4009 Unused
$400A TRI_LO Low byte of period
$400B TRI_HI High byte of period and length counter value
$400C NOISE_VOL Noise Volume
$400D Unused
$400E NOISE_LO Period and waveform shape
$400F NOISE_HI Length counter value
$4010 DMC_FREQ DMC IRQ flag, loop flag and frequency
$4011 DMC_RAW 7-bit DAC
$4012 DMC_START Start address = $C000 + $40*$xx
$4013 DMC_LEN Sample length = $10*$xx + 1 bytes (128*$xx + 8 samples)
$4014 OAMDMA OAM DMA: Copy 256 bytes from $xx00-$xxFF into OAM via OAMDATA ($2004)
$4015 SND_CHN Sound channels enable Sound channel and IRQ status
$4016 JOY1 Joystick strobe Joystick 1 data
$4017 JOY2 Frame counter control Joystick 2 data
$4018-$401A APU test functionality that is normally disabled. See CPU Test Mode.
$401C-$401F Unfinished IRQ timer functionality that is always disabled. See RP2A03 Programmable Interval Timer.

See also