8-bit Multiply

From NESdev Wiki
Revision as of 06:07, 12 October 2017 by Rainwarrior (talk | contribs) (fixing comment alignment (tabs should only be used to align the left column, not mid-line, because variable tab widths breaks this))
Jump to navigationJump to search

The following code multiplies two 8-bit integers (range 0...255) and outputs a 16-bit result using only real calculation, no lockup table so the size of the code is very small.

Bregalad

This routine by Bregalad does binary long multiplication (a.k.a. "the Russian Peasant method").

;8-bit multiply
;by Bregalad
;Enter with A,Y, numbers to multiply
;Output with YA = 16-bit result (X is unchanged)
Multiply:
	sty Factor  ;Store input factor
	ldy #$00
	sty Res
	sty Res2    ;Clear result
	ldy #$08    ;Number of shifts needed

-	lsr A       ;Shift right input number
	bcc +       ;Check if bit is set
	pha
	lda Res2
	clc
	adc Factor
	sta Res2    ;If so add number to result
	pla
+	lsr Res2    ;Shift result right
	ror Res
	dey
	bne -
	lda Res
	ldy Res2
	rts

An optimization for efficiency is made here; binary long multiplication requires adding one multiplicand to the result at various bit-shifts (i.e. multiply by each power of 2). The naive approach might maintain the value to add as a 16-bit value, left shifting it once each iteration to reach the next power of 2. This one, however, takes advantage of the input being only 8-bits wide, and instead pre-multiplies the result by 256 (8 bits), and each iteration instead right-shifts the result. After 8 iterations the pre-multiply is undone, and the advantage gained is that only the shift is 16-bit; adding the multiplicand remains an efficient 8-bit add.

Bob Rost / frantik

This routine by Bob Rost is another binary long multiplication, taken from his NES Development Class PDFs.

; Multiply two bytes in memory using Russian peasant algorithm
; by frantik

; Accepts: value1ptr and value2ptr, pointers to bytes in memory
;   value2ptr should point to the lesser of the two values 
;   for increased efficiency
; Uses: $00, $01, $02 for temporary variables
; Returns: 16 bit value in $00 and $01

.macro multiply value1ptr, value2ptr

ret  = $00          ; return value
temp = $02          ; temp storage

	lda #$00        ; clear temporary variables
	sta ret
	sta ret+1
	sta temp
	jmp start:

-loop:
	asl value1ptr   ; double first value
	rol temp        ; using 16bit precision
	lsr value2ptr   ; halve second vale
start:
	lda value2ptr   ;
	and #01         ; is new 2nd value an odd number?
	beq -loop:      ; 
	clc             ; if so, add new 1st value to running total
	lda ret         ;
	adc value1ptr   ;
	sta ret         ;
	lda ret+1       ;
	adc temp        ;
	sta ret+1       ;
	lda value2ptr   ;
	cmp #01         ; is 2nd value 1?  if so, we're done
	bne -loop:      ; otherwise, loop
.endm