APU Noise

The NES APU noise channel generates pseudo-random 1-bit noise at 16 different frequencies.

The noise channel contains the following: envelope generator, timer, shift register with feedback, length counter.

   Timer --> Shift Register   Length Counter
                   |                |
                   v                v
Envelope -------> Gate ----------> Gate --> (to mixer)

$400C	--le.eeee	Length counter halt and envelope (write)
$400E	L---.PPPP	Loop and period (write)
bit 7	L--- ----	Loop flag
bits 3-0	---- PPPP	The timer period is set to entry P of the following: Rate $0 $1 $2 $3 $4 $5 $6 $7 $8 $9 $A $B $C $D $E $F -------------------------------------------------------------------------- NTSC 4, 8, 16, 32, 64, 96, 128, 160, 202, 254, 380, 508, 762, 1016, 2034, 4068 PAL 4, 7, 14, 30, 60, 88, 118, 148, 188, 236, 354, 472, 708, 944, 1890, 3778
$400F	llll.l---	Length counter load and envelope restart (write)

When the timer clocks the shift register, the following two actions occur in order:

1. Bit 14 of the shift register is replaced with the exclusive-OR of bit 0 and one other bit: bit 6 if loop is set, otherwise bit 1.
   Shift register bits: %-E------.-6----10
2. The shift register is shifted one bit right (bit 0 is lost).

This results in a pseudo-random bit sequence, 32767 bits long when loop is clear, otherwise 93 bits long (the particular 93-bit sequence depends on where in the 32767-bit sequence the shift register was when loop was set).

The mixer receives the current envelope volume except when

• Bit 0 of the shift register is set, or
• The length counter is zero

On power-up, the shift register is loaded with the value 1.