APU Status

From NESdev Wiki
Revision as of 20:02, 26 May 2012 by Rainwarrior (talk | contribs) (APU category)
Jump to navigationJump to search

The NES APU status register allows channels to be enabled and disabled, and the current playing status of channels and the interrupt flags to be read.

$4015 ---D.NT21 NES APU Status (write)
bit 4 ---D ---- If clear, the DMC's bytes remaining is set to 0, otherwise the DMC sample is restarted only if the DMC's bytes remaining is 0.
bit 3 ---- N--- Noise channel's length counter enabled flag
bit 2 ---- -T-- Triangle channel's length counter enabled flag
bit 1 ---- --2- Pulse channel 2's length counter enabled flag
bit 0 ---- ---1 Pulse channel 1's length counter enabled flag
Side effects After the write, the DMC's interrupt flag is cleared, any length counter that is disabled is reset to 0.
 
$4015 IF-D.NT21 NES APU Status (read)
bit 7 I--- ---- DMC interrupt flag
bit 6 -F-- ---- Frame interrupt flag
bit 4 ---D ---- DMC bytes remaining is non-zero
bit 3 ---- N--- Noise channel's length counter is non-zero
bit 2 ---- -T-- Triangle channel's length counter is non-zero
bit 1 ---- --2- Pulse channel 2's length counter is non-zero
bit 0 ---- ---1 Pulse channel 1's length counter is non-zero
Side effects Clears the frame interrupt flag after being read (but not the DMC interrupt flag).
If an interrupt flag was set at the same moment of the read, it will read back as 1 but it will not be cleared.