Delay code: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (→‎Inline code: add missing semicolons)
m (fix inconsistent indentation (group PHA+TYA and TAY+PLA together))
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== Delay code ==
Code that causes a parametrised number of cycles of delay.
Code that causes a parametrised number of cycles of delay.


Line 6: Line 4:
If you want to ensure this condition at compile time, use the bccnw/beqnw/etc. macros that are listed at [[Fixed cycle delay]].
If you want to ensure this condition at compile time, use the bccnw/beqnw/etc. macros that are listed at [[Fixed cycle delay]].


=== Inline code ===
== Inline code ==


==== 2—3 cycles of delay: delay=r+2; 0 ≤ r ≤ 1, r⊢Z, Δr = 0) ====
=== 2—3 cycles of delay: delay=r+2; 0 ≤ r ≤ 1, r⊢Z, Δr = 0) ===


<pre>        bne @1
<pre>        bne @1
@1:</pre>
@1:</pre>


==== 4&mdash;5 cycles of delay: delay=r+4; 0 ≤ r ≤ 1, Δr = 0) ====
=== 4&mdash;5 cycles of delay: delay=r+4; 0 ≤ r ≤ 1, Δr = 0) ===
<pre>        ora #0 ; use ora=A, cpx=X, cpy=Y
<pre>        ora #0 ; use ora=A, cpx=X, cpy=Y
         bne @1
         bne @1
@1:</pre>
@1:</pre>


==== 4&mdash;5 cycles of delay: delay=X+4; 0 ≤ X ≤ 1) ====
=== 4&mdash;5 cycles of delay: delay=X+4; 0 ≤ X ≤ 1) ===


<pre>        dex
<pre>        dex
Line 24: Line 22:
@1:</pre>
@1:</pre>


==== 5&mdash;7 cycles of delay: delay=A+5; 0 ≤ A ≤ 2, A⊢Z) ====
=== 5&mdash;7 cycles of delay: delay=A+5; 0 ≤ A ≤ 2, A⊢Z) ===


<pre>        beq @2
<pre>        beq @2
Line 31: Line 29:
@3:</pre>
@3:</pre>


==== 5&mdash;7 cycles of delay: delay=r+5; 0 ≤ r ≤ 2, Δr = 0) ====
=== 5&mdash;7 cycles of delay: delay=r+5; 0 ≤ r ≤ 2, Δr = 0) ===


<pre>        cmp #1 ; use cmp=A, cpx=X, cpy=Y
<pre>        cmp #1 ; use cmp=A, cpx=X, cpy=Y
Line 38: Line 36:
@3:</pre>
@3:</pre>


==== 5&mdash;7 cycles of delay: delay=X+5; 0 ≤ X ≤ 2) ====
=== 5&mdash;7 cycles of delay: delay=X+5; 0 ≤ X ≤ 2) ===


<pre>        dex
<pre>        dex
Line 45: Line 43:
@3:</pre>
@3:</pre>


==== 6&mdash;9 cycles of delay: delay=A+6; 0 ≤ A ≤ 3, A⊢Z) ====
=== 6&mdash;9 cycles of delay: delay=A+6; 0 ≤ A ≤ 3, A⊢Z) ===


<pre>        beq @2
<pre>        beq @2
Line 53: Line 51:
@4:</pre>
@4:</pre>


==== 7&mdash;10 cycles of delay: delay=A+7; 0 ≤ A ≤ 3) ====
=== 7&mdash;10 cycles of delay: delay=A+7; 0 ≤ A ≤ 3) ===


<pre>        lsr
<pre>        lsr
Line 61: Line 59:
@4:</pre>
@4:</pre>


==== 8&mdash;11 cycles of delay: delay=X+8; 0 ≤ X ≤ 3) ====
=== 8&mdash;11 cycles of delay: delay=X+8; 0 ≤ X ≤ 3) ===


<pre>        dex
<pre>        dex
Line 70: Line 68:
@5:</pre>
@5:</pre>


==== 9&mdash;14 cycles of delay: delay=A&minus;242; 251 ≤ A ≤ 255; C = 0) ====
=== 9&mdash;14 cycles of delay: delay=A&minus;242; 251 ≤ A ≤ 255; C = 0) ===


<pre>        adc #3  ;  2 2 2 2 2  FE FF 00 01 02
<pre>        adc #3  ;  2 2 2 2 2  FE FF 00 01 02
         bcc @4  ;  3 3 2 2 2  FE FF 00 01 02
         bcc @4  ;  3 3 2 2 2  FE FF 00 01 02 ;bmi works too
         lsr    ;  - - 2 2 2  -- -- 00 00 01
         lsr    ;  - - 2 2 2  -- -- 00 00 01
         beq @5  ;  - - 3 3 2  -- -- 00 00 01
         beq @5  ;  - - 3 3 2  -- -- 00 00 01
Line 80: Line 78:
@6:</pre>
@6:</pre>


==== 10&mdash;14 cycles of delay: delay=X+10; 0 ≤ X ≤ 4) ====
=== 10&mdash;14 cycles of delay: delay=X+10; 0 ≤ X ≤ 4) ===


<pre>        cpx #3
<pre>        cpx #3
Line 90: Line 88:
@6:</pre>
@6:</pre>


==== 9&mdash;14 cycles of delay: delay=A+9; 0 ≤ A ≤ 5) ====
=== 9&mdash;14 cycles of delay: delay=A+9; 0 ≤ A ≤ 5) ===


<pre>        lsr
<pre>        lsr
Line 96: Line 94:
@2:    beq @5
@2:    beq @5
         lsr
         lsr
         bcs @6
         bcs @6 ;beq works too
@5:    bne @6
@5:    bne @6
@6:</pre>
@6:</pre>


==== 9&mdash;16 cycles of delay: delay=A+9; 0 ≤ A ≤ 7) ====
=== 9&mdash;16 cycles of delay: delay=A+9; 0 ≤ A ≤ 7) ===


<pre>        lsr
<pre>        lsr
Line 111: Line 109:
@7:</pre>
@7:</pre>


==== 11&mdash;19 cycles of delay: delay=A+11; 0 ≤ A ≤ 8) ====
=== 11&mdash;19 cycles of delay: delay=A+11; 0 ≤ A ≤ 8) ===


<pre>;      Cycles | A | 0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8
<pre>;      Cycles | A | 0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8
Line 118: Line 116:
         adc #255  ; 2  -  2  -  2  -  2  -  2  |-1  - c0  - c1  - c2  - c3
         adc #255  ; 2  -  2  -  2  -  2  -  2  |-1  - c0  - c1  - c2  - c3
@3:    beq @7    ; 2  3  3  2  2  2  2  2  2  |-1 c0 c0 c1 c1 c2 c2 c3 c3
@3:    beq @7    ; 2  3  3  2  2  2  2  2  2  |-1 c0 c0 c1 c1 c2 c2 c3 c3
         bcc @9    ; 3  -  -  2  2  2  2  2  2  |-1  -  - c1 c1 c2 c2 c3 c3
         bcc @9    ; 3  -  -  2  2  2  2  2  2  |-1  -  - c1 c1 c2 c2 c3 c3 ;bmi works too
         lsr      ; -  -  -  2  2  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
         lsr      ; -  -  -  2  2  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
         beq @9    ; -  -  -  3  3  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
         beq @9    ; -  -  -  3  3  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
Line 126: Line 124:
</pre>
</pre>


==== 12&mdash;23 cycles of delay: delay=A+12; 0 ≤ A ≤ 11) ====
=== 12&mdash;23 cycles of delay: delay=A+12; 0 ≤ A ≤ 11) ===


<pre>;      Cycles | A | 0  0  0  0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8  9 10 11
<pre>;      Cycles | A | 0  0  0  0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8  9 10 11
Line 133: Line 131:
@2:    lsr      ; 2  2  2  2  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
@2:    lsr      ; 2  2  2  2  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
         bcc @5    ; 3  3  2  2  3  3  2  2  3  3  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
         bcc @5    ; 3  3  2  2  3  3  2  2  3  3  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
         bcs @5    ; -  -  3  3  -  -  3  3  -  -  3  3  | -  -  0  0  -  -  1  1  -  -  2  2
         bcs @5    ; -  -  3  3  -  -  3  3  -  -  3  3  | -  -  0  0  -  -  1  1  -  -  2  2 ;bpl works too
@5:    beq @10  ; 3  3  3  3  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
@5:    beq @10  ; 3  3  3  3  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
         lsr      ; -  -  -  -  2  2  2  2  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1
         lsr      ; -  -  -  -  2  2  2  2  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1
         bcs @10  ; -  -  -  -  3  3  3  3  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1
         bcs @10  ; -  -  -  -  3  3  3  3  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1 ;beq works too
         delay_n 5 ; -  -  -  -  -  -  -  -  5  5  5  5  | -  -  -  -  -  -  -  -  1  1  1  1
         delay_n 5 ; -  -  -  -  -  -  -  -  5  5  5  5  | -  -  -  -  -  -  -  -  1  1  1  1
@10:      ;Total:  12 13 14 15 16 17 18 19 20 21 22 23
@10:      ;Total:  12 13 14 15 16 17 18 19 20 21 22 23
Line 143: Line 141:
For delay_n 5, anything that causes 5 cycles of delay works. Examples: <tt>inc $00</tt>, <tt>nop</tt> + <tt>cmp $C5</tt>
For delay_n 5, anything that causes 5 cycles of delay works. Examples: <tt>inc $00</tt>, <tt>nop</tt> + <tt>cmp $C5</tt>


==== 15&mdash;270 cycles of delay: delay=A+15; 0 ≤ A ≤ 255) ====
=== 15&mdash;270 cycles of delay: delay=A+15; 0 ≤ A ≤ 255) ===


This code peels slices of 5 cycles with a SBC-BCS loop, and then executes the delay code for 9&mdash;14 cycles where delay = A&minus;242 cycles and carry=clear. The same code will appear later as a function version (which adds 12 cycles overhead due to JSR+RTS cost).
This code peels slices of 5 cycles with a SBC-BCS loop, and then executes the delay code for A=251&mdash;255. The same code will appear later as a function version (which adds 12 cycles overhead due to JSR+RTS cost).


<pre>        sec     
<pre>        sec     
Line 158: Line 156:
@6:</pre>
@6:</pre>


==== 5&mdash;65285 cycles of delay: delay = 256×X + 5 ====
=== 16&mdash;271 cycles of delay: delay=A+16; 0 ≤ A ≤ 255) ===
 
This code peels slices of 9 cycles with a CMP-BCC-SBC-BCS loop, and then executes the delay code for A=0&mdash;8.
 
<pre>@L:    cmp #9          ;2
        bcc @0          ;2 (+1)
        sbc #9          ;2
        bcs @L          ;3
;      Cycles | A | 5  5  5  5  5  5  5  5  5  | 0  1  2  3  4  5  6  7  8
@0:    lsr      ; 2  2  2  2  2  2  2  2  2  | 0  0  1  1  2  2  3  3  4
        bcs @3    ; 2  3  2  3  2  3  2  3  2  | 0 c0  1 c1  2 c2  3 c3  4
        adc #255  ; 2  -  2  -  2  -  2  -  2  |-1  - c0  - c1  - c2  - c3
@3:    beq @7    ; 2  3  3  2  2  2  2  2  2  |-1 c0 c0 c1 c1 c2 c2 c3 c3
        bcc @9    ; 3  -  -  2  2  2  2  2  2  |-1  -  - c1 c1 c2 c2 c3 c3
        lsr      ; -  -  -  2  2  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
        beq @9    ; -  -  -  3  3  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
@7:    bcc @9    ; -  2  2  -  -  3  3  2  2  | - c0 c0  -  -  1  1 c1 c1
        bne @9    ; -  2  2  -  -  -  -  3  3  | - c0 c0  -  -  -  - c1 c1
@9:      ;Total:  16 17 18 19 20 21 22 23 24</pre>
 
=== 5&mdash;65285 cycles of delay: delay = 256×X + 5 ===


Clobbers A:
Clobbers A:
Line 188: Line 206:
@10:</pre>
@10:</pre>


==== 18&mdash;218103813 cycles of delay: delay = 13×(65536×Y + 256×A + X) + 18 ====
=== 18&mdash;218103813 cycles of delay: delay = 13×(65536×Y + 256×A + X) + 18 ===


<pre>        iny
<pre>        iny
Line 201: Line 219:
         rts</pre>
         rts</pre>


=== Callable functions ===
== Callable functions ==


==== A + 25 cycles of delay, clobbers A, Z&amp;N, C, V ====
=== A + 25 cycles of delay, clobbers A, Z&amp;N, C, V ===


This code peels slices of 7 cycles with a CMP-BCS-SBC loop, and then executes the delay code for 9&mdash;16 cycles with A = 0&mdash;6. The reason its overhead is smaller than in the version that peels 5 cycles is because the case for A&lt;7 executes only two instructions instead of three. This comes at the cost that the entry point is not the first instruction. Therefore the code can only exist as a callable function and not inline code.
This code peels slices of 7 cycles with a CMP-BCS-SBC loop, and then executes the delay code for 9&mdash;16 cycles with A = 0&mdash;6. The reason its overhead is smaller than in the version that peels 5 cycles is because the case for A&lt;7 executes only two instructions instead of three. This comes at the cost that the entry point is not the first instruction. Therefore the code can only exist as a callable function and not inline code.
Line 230: Line 248:
; Total cycles:    25 26 27 28 29 30 31</pre>
; Total cycles:    25 26 27 28 29 30 31</pre>


==== A + 27 cycles of delay, clobbers A, Z&amp;N, C, V ====
=== A + 27 cycles of delay, clobbers A, Z&amp;N, C, V ===


This function has longer overhead than delay_a_25_clocks,
This function has longer overhead than delay_a_25_clocks,
Line 256: Line 274:
The JSR+RTS instructions adds 12 cycles of overhead.
The JSR+RTS instructions adds 12 cycles of overhead.


==== 256×A + X + 33 cycles of delay, clobbers A, Z&amp;N, C, V ====
=== 256×A + X + 33 cycles of delay, clobbers A, Z&amp;N, C, V ===


<pre>;;;;;;;;;;;;;;;;;;;;;;;;
<pre>;;;;;;;;;;;;;;;;;;;;;;;;
Line 287: Line 305:
         ldy $A4  ; 3-1</pre>
         ldy $A4  ; 3-1</pre>


==== 256×A + 16 cycles of delay, clobbers A, Z&amp;N, C, V ====
=== 256×A + 16 cycles of delay, clobbers A, Z&amp;N, C, V ===


<pre>;;;;;;;;;;;;;;;;;;;;;;;;
<pre>;;;;;;;;;;;;;;;;;;;;;;;;
Line 300: Line 318:
delay_256a_11_clocks_:
delay_256a_11_clocks_:
;5 cycles done. Must consume 256 cycles; 251 cycles remain.
;5 cycles done. Must consume 256 cycles; 251 cycles remain.
         pha                      ;3
         pha                      ;3 - 3
        tya                     ;2
        tya                     ;2 - 5
         ldy #46                ;2
         ldy #46                ;2 - 7
@l:      dey                    ;2*46
@l:      dey                    ;2*46 - 99
         bne @l                  ;3*46
         bne @l                  ;3*46 - 237
         nop                    ;2-1
         nop                    ;2 - 238
         tay                      ;2
         tay                      ;2 - 240
sec                       ;2
        pla                      ;4 - 244
sbc #1                   ;2
sec                     ;2 - 246
jmp delay_256a_16_clocks ;3</pre>
sbc #1                   ;2 - 248
jmp delay_256a_16_clocks ;3 - 251</pre>


If you can clobber Y, change the part that begins with pha and ends in pla, into this, for shorter code:
If you can clobber Y, change the part that begins with pha and ends in pla, into this, for shorter code:
Line 318: Line 337:
         ldy $A4  ; 3-1</pre>
         ldy $A4  ; 3-1</pre>


==== 256×X + 16 cycles of delay, clobbers X, Z&amp;N ====
=== 256×X + 16 cycles of delay, clobbers X, Z&amp;N ===


<pre>;;;;;;;;;;;;;;;;;;;;;;;;
<pre>;;;;;;;;;;;;;;;;;;;;;;;;
Line 332: Line 351:
;5 cycles done. Must consume 256 cycles; 251 cycles remain.
;5 cycles done. Must consume 256 cycles; 251 cycles remain.
         pha                      ;3
         pha                      ;3
        tya                     ;2
        tya                     ;2
         ldy #46                ;2
         ldy #46                ;2
@l:      dey                    ;2*46
@l:      dey                    ;2*46
Line 351: Line 370:
bne @l                  ;3*50</pre>
bne @l                  ;3*50</pre>


==== 256×X + A + 30 cycles of delay, clobbers A, X, Z&amp;N, C, V ====
=== 256×X + A + 30 cycles of delay, clobbers A, X, Z&amp;N, C, V ===


<pre>;;;;;;;;;;;;;;;;;;;;;;;;
<pre>;;;;;;;;;;;;;;;;;;;;;;;;
Line 401: Line 420:
This function is constructed by concatenating delay_a_25_clocks and the inline delay code for 5&mdash;65285 cycles.
This function is constructed by concatenating delay_a_25_clocks and the inline delay code for 5&mdash;65285 cycles.


==== 851968×Y + 3328×A + 13×X + 30 cycles of delay, clobbers A, X, Y, Z&amp;N, C, V ====
=== 851968×Y + 3328×A + 13×X + 30 cycles of delay, clobbers A, X, Y, Z&amp;N, C, V ===


<pre>;;;;;;;;;;;;;;;;;;;;;;;;
<pre>;;;;;;;;;;;;;;;;;;;;;;;;
Line 421: Line 440:


== See also ==
== See also ==
* [[Cycle counting]]
* [[Fixed cycle delay]]
* [[Fixed cycle delay]]

Latest revision as of 16:08, 27 July 2022

Code that causes a parametrised number of cycles of delay.

Note that all branch instructions are written assuming that no page wrap occurs. If you want to ensure this condition at compile time, use the bccnw/beqnw/etc. macros that are listed at Fixed cycle delay.

Inline code

2—3 cycles of delay: delay=r+2; 0 ≤ r ≤ 1, r⊢Z, Δr = 0)

        bne @1
@1:

4—5 cycles of delay: delay=r+4; 0 ≤ r ≤ 1, Δr = 0)

        ora #0 ; use ora=A, cpx=X, cpy=Y
        bne @1
@1:

4—5 cycles of delay: delay=X+4; 0 ≤ X ≤ 1)

        dex
        bpl @1
@1:

5—7 cycles of delay: delay=A+5; 0 ≤ A ≤ 2, A⊢Z)

        beq @2
        lsr
@2:     bne @3
@3:

5—7 cycles of delay: delay=r+5; 0 ≤ r ≤ 2, Δr = 0)

        cmp #1 ; use cmp=A, cpx=X, cpy=Y
        bcc @3
        bne @3
@3:

5—7 cycles of delay: delay=X+5; 0 ≤ X ≤ 2)

        dex
        bmi @3
        bne @3
@3:

6—9 cycles of delay: delay=A+6; 0 ≤ A ≤ 3, A⊢Z)

        beq @2
        lsr
@2:     beq @4
        bcs @4
@4:

7—10 cycles of delay: delay=A+7; 0 ≤ A ≤ 3)

        lsr
        beq @3
        bpl @3
@3:     bcs @4
@4:

8—11 cycles of delay: delay=X+8; 0 ≤ X ≤ 3)

        dex
        bmi @4
        dex
        bmi @5
@4:     bne @5
@5:

9—14 cycles of delay: delay=A−242; 251 ≤ A ≤ 255; C = 0)

        adc #3  ;  2 2 2 2 2  FE FF 00 01 02
        bcc @4  ;  3 3 2 2 2  FE FF 00 01 02 ;bmi works too
        lsr     ;  - - 2 2 2  -- -- 00 00 01
        beq @5  ;  - - 3 3 2  -- -- 00 00 01
@4:     lsr     ;  2 2 - - 2  7F 7F -- -- 00
@5:     bcs @6  ;  2 3 2 3 2  7F 7F 00 00 00
@6:

10—14 cycles of delay: delay=X+10; 0 ≤ X ≤ 4)

        cpx #3
        bcc @3
        bne @3
@3:     dex
        bmi @6
        bne @6
@6:

9—14 cycles of delay: delay=A+9; 0 ≤ A ≤ 5)

        lsr
        bcs @2
@2:     beq @5
        lsr
        bcs @6 ;beq works too
@5:     bne @6
@6:

9—16 cycles of delay: delay=A+9; 0 ≤ A ≤ 7)

        lsr
        bcs @2
@2:     beq @6
        lsr
        beq @7
        bcc @7
@6:     bne @7
@7:

11—19 cycles of delay: delay=A+11; 0 ≤ A ≤ 8)

;      Cycles | A | 0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8
        lsr       ; 2  2  2  2  2  2  2  2  2  | 0  0  1  1  2  2  3  3  4
        bcs @3    ; 2  3  2  3  2  3  2  3  2  | 0 c0  1 c1  2 c2  3 c3  4
        adc #255  ; 2  -  2  -  2  -  2  -  2  |-1  - c0  - c1  - c2  - c3
@3:     beq @7    ; 2  3  3  2  2  2  2  2  2  |-1 c0 c0 c1 c1 c2 c2 c3 c3
        bcc @9    ; 3  -  -  2  2  2  2  2  2  |-1  -  - c1 c1 c2 c2 c3 c3 ;bmi works too
        lsr       ; -  -  -  2  2  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
        beq @9    ; -  -  -  3  3  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
@7:     bcc @9    ; -  2  2  -  -  3  3  2  2  | - c0 c0  -  -  1  1 c1 c1
        bne @9    ; -  2  2  -  -  -  -  3  3  | - c0 c0  -  -  -  - c1 c1
@9:       ;Total:  11 12 13 14 15 16 17 18 19

12—23 cycles of delay: delay=A+12; 0 ≤ A ≤ 11)

;      Cycles | A | 0  0  0  0  0  0  0  0  0  0  0  0  | 0  1  2  3  4  5  6  7  8  9 10 11
        lsr       ; 2  2  2  2  2  2  2  2  2  2  2  2  | 0  0  1  1  2  2  3  3  4  4  5  5
        bcs @2    ; 2  3  2  3  2  3  2  3  2  3  2  3  | 0  0  1  1  2  2  3  3  4  4  5  5
@2:     lsr       ; 2  2  2  2  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
        bcc @5    ; 3  3  2  2  3  3  2  2  3  3  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
        bcs @5    ; -  -  3  3  -  -  3  3  -  -  3  3  | -  -  0  0  -  -  1  1  -  -  2  2 ;bpl works too
@5:     beq @10   ; 3  3  3  3  2  2  2  2  2  2  2  2  | 0  0  0  0  1  1  1  1  2  2  2  2
        lsr       ; -  -  -  -  2  2  2  2  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1
        bcs @10   ; -  -  -  -  3  3  3  3  2  2  2  2  | -  -  -  -  0  0  0  0  1  1  1  1 ;beq works too
        delay_n 5 ; -  -  -  -  -  -  -  -  5  5  5  5  | -  -  -  -  -  -  -  -  1  1  1  1
@10:      ;Total:  12 13 14 15 16 17 18 19 20 21 22 23

For delay_n 5, anything that causes 5 cycles of delay works. Examples: inc $00, nop + cmp $C5

15—270 cycles of delay: delay=A+15; 0 ≤ A ≤ 255)

This code peels slices of 5 cycles with a SBC-BCS loop, and then executes the delay code for A=251—255. The same code will appear later as a function version (which adds 12 cycles overhead due to JSR+RTS cost).

        sec     
@L:     sbc #5  
        bcs @L  ;  6 6 6 6 6  FB FC FD FE FF
        adc #3  ;  2 2 2 2 2  FE FF 00 01 02
        bcc @4  ;  3 3 2 2 2  FE FF 00 01 02
        lsr     ;  - - 2 2 2  -- -- 00 00 01
        beq @5  ;  - - 3 3 2  -- -- 00 00 01
@4:     lsr     ;  2 2 - - 2  7F 7F -- -- 00
@5:     bcs @6  ;  2 3 2 3 2  7F 7F 00 00 00
@6:

16—271 cycles of delay: delay=A+16; 0 ≤ A ≤ 255)

This code peels slices of 9 cycles with a CMP-BCC-SBC-BCS loop, and then executes the delay code for A=0—8.

@L:     cmp #9          ;2
        bcc @0          ;2 (+1)
        sbc #9          ;2
        bcs @L          ;3
;      Cycles | A | 5  5  5  5  5  5  5  5  5  | 0  1  2  3  4  5  6  7  8
@0:     lsr       ; 2  2  2  2  2  2  2  2  2  | 0  0  1  1  2  2  3  3  4
        bcs @3    ; 2  3  2  3  2  3  2  3  2  | 0 c0  1 c1  2 c2  3 c3  4
        adc #255  ; 2  -  2  -  2  -  2  -  2  |-1  - c0  - c1  - c2  - c3
@3:     beq @7    ; 2  3  3  2  2  2  2  2  2  |-1 c0 c0 c1 c1 c2 c2 c3 c3
        bcc @9    ; 3  -  -  2  2  2  2  2  2  |-1  -  - c1 c1 c2 c2 c3 c3
        lsr       ; -  -  -  2  2  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
        beq @9    ; -  -  -  3  3  2  2  2  2  | -  -  - c0 c0  1  1 c1 c1
@7:     bcc @9    ; -  2  2  -  -  3  3  2  2  | - c0 c0  -  -  1  1 c1 c1
        bne @9    ; -  2  2  -  -  -  -  3  3  | - c0 c0  -  -  -  - c1 c1
@9:       ;Total:  16 17 18 19 20 21 22 23 24

5—65285 cycles of delay: delay = 256×X + 5

Clobbers A:

@0:     txa       ;2
        beq @10   ;3
        nop       ;2
        tya       ;2
         ldy #48  ;2
@l:      dey      ;2×48
         bne @l   ;3×48
        tay       ;2−1
        dex       ;2
        jmp @0    ;3
@10:

Doesn’t clobber A (2 bytes longer):

@0:     cpx #0    ;2
        beq @10   ;3
        pha       ;3
        tya       ;2
         ldy #47  ;2
@l:      dey      ;2×47
         bne @l   ;3×47
        tay       ;2−1
        pla       ;4
        jmp @0    ;3
@10:

18—218103813 cycles of delay: delay = 13×(65536×Y + 256×A + X) + 18

        iny
@l1:    nop
        nop
@l2:    cpx #1
        dex
        sbc #0
        bcs @l1
        dey
        bne @l2
        rts

Callable functions

A + 25 cycles of delay, clobbers A, Z&N, C, V

This code peels slices of 7 cycles with a CMP-BCS-SBC loop, and then executes the delay code for 9—16 cycles with A = 0—6. The reason its overhead is smaller than in the version that peels 5 cycles is because the case for A<7 executes only two instructions instead of three. This comes at the cost that the entry point is not the first instruction. Therefore the code can only exist as a callable function and not inline code.

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A clocks + overhead
; Clobbers A. Preserves X,Y.
; Time: A+25 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
                  ;       Cycles              Accumulator         Carry flag
                  ; 0  1  2  3  4  5  6          (hex)           0 1 2 3 4 5 6
                  ;
                  ; 6  6  6  6  6  6  6   00 01 02 03 04 05 06
:      sbc #7     ; carry set by CMP
delay_a_25_clocks:
       cmp #7     ; 2  2  2  2  2  2  2   00 01 02 03 04 05 06   0 0 0 0 0 0 0
       bcs :-     ; 2  2  2  2  2  2  2   00 01 02 03 04 05 06   0 0 0 0 0 0 0
       lsr        ; 2  2  2  2  2  2  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
       bcs *+2    ; 2  3  2  3  2  3  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
       beq :+     ; 3  3  2  2  2  2  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
       lsr        ;       2  2  2  2  2         00 00 01 01 01       1 1 0 0 1
       beq @rts   ;       3  3  2  2  2         00 00 01 01 01       1 1 0 0 1
       bcc @rts   ;             3  3  2               01 01 01           0 0 1
:      bne @rts   ; 2  2              3   00 00             01   0 1         0
@rts:  rts        ; 6  6  6  6  6  6  6   00 00 00 00 01 01 01   0 1 1 1 0 0 1
; Total cycles:    25 26 27 28 29 30 31

A + 27 cycles of delay, clobbers A, Z&N, C, V

This function has longer overhead than delay_a_25_clocks, but it can be appended into other functions, as the execution begins from the first instruction.

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A clocks + overhead
; Clobbers A. Preserves X,Y.
; Time: A+27 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
delay_a_27_clocks:
        sec     
@L:     sbc #5  
        bcs @L  ;  6 6 6 6 6  FB FC FD FE FF
        adc #3  ;  2 2 2 2 2  FE FF 00 01 02
        bcc @4  ;  3 3 2 2 2  FE FF 00 01 02
        lsr     ;  - - 2 2 2  -- -- 00 00 01
        beq @5  ;  - - 3 3 2  -- -- 00 00 01
@4:     lsr     ;  2 2 - - 2  7F 7F -- -- 00
@5:     bcs @6  ;  2 3 2 3 2  7F 7F 00 00 00
@6:     rts     ;

It is created by wrapping the code for 15—270 cycles of delay into a function. The JSR+RTS instructions adds 12 cycles of overhead.

256×A + X + 33 cycles of delay, clobbers A, Z&N, C, V

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A:X clocks+overhead
; Time: 256*A+X+33 clocks (including JSR)
; Clobbers A. Preserves X,Y. Has relocations.
;;;;;;;;;;;;;;;;;;;;;;;;
:	; 5 cycles done, do 256-5 more.
	sbc #1			; 2 cycles - Carry was set from cmp
	pha                     ; 3
	 lda #(256-27 - 16)     ; 2
	 jsr delay_a_27_clocks  ; 240
	pla                     ; 4
delay_256a_x_33_clocks:
	cmp #1			; +2
	bcs :-			; +3 
	; 0-255 cycles remain, overhead = 4
	txa 			; -1+2; 6; +27 = 33
	;passthru
<<Place the function delay_a_27_clocks immediately following here>>

Can be trivially changed to swap X, Y.

If you can clobber Y, change the part that begins with "pha" and ends with "pla" into this, for 1 byte shorter code:

	ldy #49  ; 2
@l:     dey      ; 49*2
        bne @l   ; 49*3
        ldy $A4  ; 3-1

256×A + 16 cycles of delay, clobbers A, Z&N, C, V

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays A*256 clocks + overhead
; Clobbers A. Preserves X,Y.
; Time: A*256+16 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
delay_256a_16_clocks:
	cmp #0
	bne delay_256a_11_clocks_
	rts
delay_256a_11_clocks_:
	;5 cycles done. Must consume 256 cycles; 251 cycles remain.
        pha                      ;3 - 3
        tya                      ;2 - 5
         ldy #46                 ;2 - 7
@l:      dey                     ;2*46 - 99
         bne @l                  ;3*46 - 237
         nop                     ;2 - 238
        tay                      ;2 - 240
        pla                      ;4 - 244
	sec                      ;2 - 246
	sbc #1                   ;2 - 248
	jmp delay_256a_16_clocks ;3 - 251

If you can clobber Y, change the part that begins with pha and ends in pla, into this, for shorter code:

	ldy #48  ; 2
@l:     dey      ; 49*2
        bne @l   ; 49*3
        ldy $A4  ; 3-1

256×X + 16 cycles of delay, clobbers X, Z&N

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays X*256 clocks + overhead
; Clobbers X,Y. Preserves A. Relocatable.
; Time: X*256+16 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
delay_256x_16_clocks:
	cpx #0
	bne delay_256x_11_clocks_
	rts
delay_256x_11_clocks_:
	;5 cycles done. Must consume 256 cycles; 251 cycles remain.
        pha                      ;3
        tya                      ;2
         ldy #46                 ;2
@l:      dey                     ;2*46
         bne @l                  ;3*46
         nop                     ;2-1
         nop                     ;2
        tay                      ;2
        pla                      ;4
	dex                      ;2
	jmp delay_256x_16_clocks ;3

Can be trivially changed to swap X, Y.

If you can clobber Y, change the part that begins with pha and ends in pla, into this, for shorter code:

        ldy #50                  ;2-1
@l:	dey                      ;2*50
	bne @l                   ;3*50

256×X + A + 30 cycles of delay, clobbers A, X, Z&N, C, V

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays X*256+A clocks + overhead
; Clobbers A,X. Preserves Y.
; Depends on delay_a_25_clocks within short branch distance
; Time: X*256+A+30 clocks (including JSR)
;;;;;;;;;;;;;;;;;;;;;;;;
delay_256x_a_30_clocks:
        cpx #0                  ;2
        beq delay_a_25_clocks   ;3
        ;4 cycles done. Must consume 256 cycles; 252 cycles remain.
        pha                             ;3
         lda #(256-4-(3+2+4+2+3))-25    ;2
         jsr delay_a_25_clocks          ;238
        pla                             ;4
        dex                             ;2
        jmp delay_256x_a_30_clocks      ;3

Can be trivially changed to swap X, Y.

Alternative version that does not depend on other delay functions, but has otherwise the same implications:

:      sbc #7    ; carry set by CMP
delay_256x_a_30_clocks_b:
       cmp #7    ; 2  2  2  2  2  2  2   00 01 02 03 04 05 06   0 0 0 0 0 0 0
       bcs :-    ; 2  2  2  2  2  2  2   00 01 02 03 04 05 06   0 0 0 0 0 0 0
       lsr       ; 2  2  2  2  2  2  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
       bcs @2    ; 2  3  2  3  2  3  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
@2:    beq @6    ; 3  3  2  2  2  2  2   00 00 01 01 02 02 03   0 1 0 1 0 1 0
       lsr       ;       2  2  2  2  2         00 00 01 01 01       1 1 0 0 1
       beq @do_x ;       3  3  2  2  2         00 00 01 01 01       1 1 0 0 1
       bcc @do_x ;             3  3  2               01 01 01           0 0 1
@6:    bne @do_x ; 2  2              3   00 00             01   0 1         0
@do_x: txa       ;2
       beq @rts  ;3
       ;4 cycles done. Must consume 256 cycles; 252 cycles remain.
       nop       ;2
       tya       ;2
        ldy #48  ;2
@l:     dey      ;2*48
        bne @l   ;3*48
       tay       ;2-1
       dex       ;2
       jmp @do_x ;3
@rts:  rts

This function is constructed by concatenating delay_a_25_clocks and the inline delay code for 5—65285 cycles.

851968×Y + 3328×A + 13×X + 30 cycles of delay, clobbers A, X, Y, Z&N, C, V

;;;;;;;;;;;;;;;;;;;;;;;;
; Delays 30+13*(65536*Y+256*A+X) cycles including JSR.
; Clobbers A,X,Y.
delay_851968y_3328a_13x_30_clocks:
        iny
@l1:    nop
        nop
@l2:    cpx #1
        dex
        sbc #0
        bcs @l1
        dey
        bne @l2
        rts

This is constructed by wrapping the 18—218103813 cycles inline delay code in a function.

See also