Famicom cartridge dimensions: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Image formatting and further clarification)
Line 30: Line 30:
This outline is based on measurements from a HVC-TGROM-01 cartridge, compatible with any cartridge shell that supports any HVC-AxROM / FxROM / PxROM / SxROM / TxROM/ PCB or similar/bigger. These measurements are measured with vernier calipers with 1/128 inch accuracy. Note that this outline also details where the soldermask ends for the card edge.
This outline is based on measurements from a HVC-TGROM-01 cartridge, compatible with any cartridge shell that supports any HVC-AxROM / FxROM / PxROM / SxROM / TxROM/ PCB or similar/bigger. These measurements are measured with vernier calipers with 1/128 inch accuracy. Note that this outline also details where the soldermask ends for the card edge.


[[File:HVC-TGROM-01-board.svg|720px|center]]
[[File:HVC-TGROM-01-board.svg|border|left|720px]]
 
{| class="wikitable" align="center" style="margin-left: auto; margin-right: 0px;"
!colspan="3"|Dimensions
|-
|Symbol ||Dimensions (millimeters) ||Description
|-
|A ||90.4875 ||Board width
|-
|A.1 ||78.58125 ||Card edge width
|-
|A.2 ||80.9625 ||Notched width
|-
|A.2.1 ||42.8625 ||Inset board width 1
|-
|A.2.2 ||32.40625 ||Inset board width 2
|-
|B ||46.434375 ||Board height
|-
|B.1 ||23.217188 ||Inset board height 1
|-
|B.2 ||21.034375 ||Inset board height 2
|-
|B.3 ||10.31875 ||Card edge depth
|-
|C ||1.2 ||Board thickness
|-
|D1 ||2.38125 ||Card edge base to pad top
|-
|D.2 ||3.571875 ||Card edge base to soldermask keepout
|-
|D.3 ||7.14375 ||Power pad height
|-
|D.4 ||6.35 ||Signal pad height
|-
|E.1 ||0.873125 ||Power pad to card edge side
|-
|E.2 ||1.666875 ||Signal pad to card edge side
|-
|E.3 ||2.38125 ||Power pad width
|-
|E.4 ||1.5875 ||Signal pad width
|-
|E.5 ||0.9525 ||Space between pads
|-
|E.6 ||2.54 ||Pad spacing
|}


=== HVC-ExROM ===
=== HVC-ExROM ===

Revision as of 14:36, 23 December 2021

This page documents the dimensions of common Famicom cartridges, including their cartridge shell and their corresponding PCB type. The source files are open-source and available on Github.

TODO: identify more cartridge shell forms

Famicom cartridge shell outline

Small cartridge form

HVC-TxROM

TODO: measure and publish dimensions

HVC-NROM/CNROM

TODO: measure and publish dimensions

Large cartridge form

HVC-ExROM

TODO: measure and publish dimensions

Miscellaneous cartridge forms

TODO: document and measure other forms

Famicom cartridge PCB outline

These outlines of different cartridge PCB types are based on the most space-filling variant, so that designers may choose to cut off unused portions that their designs may not need. Some outlines of cartridges with no maximally space filling PCB are thus modified to be such, with measurements being based on adjacent types made by the same producer.

Each cartridge type varies in how the 60 pin card edge is implemented. The pin pitch is 2.54mm, with 2 rows of 30 pads. Each pad may be uniform in dimensions, or slightly thicker and longer for power/ground.

HVC-TxROM

This outline is based on measurements from a HVC-TGROM-01 cartridge, compatible with any cartridge shell that supports any HVC-AxROM / FxROM / PxROM / SxROM / TxROM/ PCB or similar/bigger. These measurements are measured with vernier calipers with 1/128 inch accuracy. Note that this outline also details where the soldermask ends for the card edge.

HVC-TGROM-01-board.svg
Dimensions
Symbol Dimensions (millimeters) Description
A 90.4875 Board width
A.1 78.58125 Card edge width
A.2 80.9625 Notched width
A.2.1 42.8625 Inset board width 1
A.2.2 32.40625 Inset board width 2
B 46.434375 Board height
B.1 23.217188 Inset board height 1
B.2 21.034375 Inset board height 2
B.3 10.31875 Card edge depth
C 1.2 Board thickness
D1 2.38125 Card edge base to pad top
D.2 3.571875 Card edge base to soldermask keepout
D.3 7.14375 Power pad height
D.4 6.35 Signal pad height
E.1 0.873125 Power pad to card edge side
E.2 1.666875 Signal pad to card edge side
E.3 2.38125 Power pad width
E.4 1.5875 Signal pad width
E.5 0.9525 Space between pads
E.6 2.54 Pad spacing

HVC-ExROM

TODO: measure and publish dimensions

HVC-NROM/CNROM

TODO: measure and publish dimensions