Family BASIC Data Recorder: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (say more about audio path)
m (describe hardware, provide link to NES equivalent schematic, add same references as on Family basic keyboard)
Line 2: Line 2:


== Hardware interface ==
== Hardware interface ==
The [[Family basic keyboard|Family BASIC Keyboard]] provides two ⅛" (3.5mm) monaural phone jacks which can be plugged into the data recorder. [http://nesdev.org/tapedrv.PNG This circuit] will provide the same interface on the NES.
=== Input ($4016 write) ===
=== Input ($4016 write) ===
  7  bit  0
  7  bit  0
Line 22: Line 23:
It is not known whether Family BASIC uses [[wikipedia:Kansas City Standard|Kansas City Standard]] encoding, [[wikipedia:Bell 103 modem|Bell 103]] or [[wikipedia:Bell 202 modem|202]], or some other arbitrary home-grown convention for encoding the audio on the tape.
It is not known whether Family BASIC uses [[wikipedia:Kansas City Standard|Kansas City Standard]] encoding, [[wikipedia:Bell 103 modem|Bell 103]] or [[wikipedia:Bell 202 modem|202]], or some other arbitrary home-grown convention for encoding the audio on the tape.
Castle Excellent's recorder handling code mostly exists between $8000 and $80FE, and provides save games using the 1200 baud variant of Kansas City Standard.
Castle Excellent's recorder handling code mostly exists between $8000 and $80FE, and provides save games using the 1200 baud variant of Kansas City Standard.
== References ==
Reverse-engineered schematics by [http://www2.odn.ne.jp/~haf09260/index.htm Enri]:
* http://www2.odn.ne.jp/~haf09260/Famic/Fambas.htm
* Also available [http://atariusa.com/Famicom_Schematics/FC%20Family%20Basic%20Keyboard%20and%20Sound%20Circuit%20Schematic.png here] and [http://atariusa.com/Famicom_Schematics/FC%20Keyboard%20Key%20Schematic.png here]

Revision as of 18:59, 24 November 2012

"Manufactured by Matsushita/Panasonic for Nintendo, the recorder was released in 1984 only in Japan as an addition to the Family BASIC Keyboard to save data from BASIC programs created by users. Also, Castle Excellent, Excitebike, Mach Rider and Wrecking Crew can use this device in order to save tracks/stages created by users." — from wikipedia

Hardware interface

The Family BASIC Keyboard provides two ⅛" (3.5mm) monaural phone jacks which can be plugged into the data recorder. This circuit will provide the same interface on the NES.

Input ($4016 write)

7  bit  0
---- ----
xxxx xExS
      | |
      | +- 1-bit DAC audio to audio cassette
      +--- When 0, force audio readback to always read as binary 0 (5V)

The audio to the cassette recorder goes through a first-order highpass at 100Hz and is attenuated to 5mVPP at the input to the recorder.

Output ($4016 read)

7  bit  0
---- ----
xxxx xxAx
       |
       +-- 1-bit ADC audio from audio cassette

Because of how magnetic tape works, playing back the tape will produce a signal that is the lowpassed derivative of the original. Then this audio from the cassette recorder goes through a highpass with corner frequency of 800Hz before being discretized. In simulation, at least square waves of frequency 1200 to 2400 Hz appear to be recovered by this processing.

Software

It is not known whether Family BASIC uses Kansas City Standard encoding, Bell 103 or 202, or some other arbitrary home-grown convention for encoding the audio on the tape. Castle Excellent's recorder handling code mostly exists between $8000 and $80FE, and provides save games using the 1200 baud variant of Kansas City Standard.

References

Reverse-engineered schematics by Enri: