INES Mapper 001: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Idem)
(merged into MMC1)
 
(5 intermediate revisions by 4 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers|001]][[Category:in NesCartDB|001]]
#REDIRECT [[MMC1]]
 
{{DEFAULTSORT:001}}[[Category:iNES Mappers]][[Category:in NesCartDB]][[Category:Nintendo licensed mappers]][[Category:NES 2.0 mappers with submappers]]
[[iNES Mapper 001]] is used to designate the [[SxROM]] boardset, all of which use the [[Nintendo MMC1]].
 
This has proven to be problematic for boards (such as SOROM, SUROM and SXROM) which use the upper CHR bank select lines to select additional PRG ROM or PRG RAM data; games which use SOROM or SXROM often must be handled individually based on the ROM checksum.
 
In the absence of data beyond basic [[iNES]] header data, an emulator may follow the following procedure to guess a board type useful for emulation:
 
# Determine whether PRG ROM is "large" (512 KiB) or "small" (256 KiB or less) and whether CHR is "large" (16-128 KiB CHR ROM) or "small" (8 KiB CHR ROM or CHR RAM).
# When PRG ROM is large, the highest CHR line (CHR A16) switches 256 KiB PRG ROM banks as in SUROM.
# When CHR is large, MMC1 registers act "normal".
# When CHR is small, the MMC1's CHR bank registers switch PRG RAM banks as in SXROM. If the battery bit is present, only banks which are written to are saved to the disk when the game is quit. When loading a game with the battery bit set, if a 8KB .sav file is present, it is repeated equally across all banks. This will lead to data being saved when it wasn't supposed to for SOROM games, but 8KB of hard disk space isn't a problem, and no known NES game had the copy protection based on PRG RAM size that was common in the Super NES era.
# When both PRG ROM and CHR are small, CHR A16 disables PRG RAM when turned on.

Latest revision as of 19:26, 4 June 2016

Redirect to: