INES Mapper 006: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (defaultsort)
mNo edit summary
Line 1: Line 1:
{{DEFAULTSORT:006}}[[Category:INES Mappers]][[Category:Mappers with cycle IRQs]]
{{DEFAULTSORT:006}}[[Category:INES Mappers]][[Category:Mappers with cycle IRQs]]
iNES Mapper 006 is used for ROM images that have been extracted from disk images for the ''Bung (Super) Game Doctor'' or ''Front Fareast Magicard'' [[RAM cartridge|RAM cartridges]] and that use [[#Mode 1: Custom|Game Doctor Mode 1]] or [[#8 KiB PRG Banking Mode|8 KiB PRG Banking Mode]] (exclusively or non-exclusively). iNES Mapper 008 specifies [[#Mode 4: GNROM|Game Doctor Mode 4]], which makes it a duplicate of [[INES Mapper 066]]. Extracted games that exclusively use the other banking modes can be run using their normal [[iNES]] mapper equivalents, provided that WRAM at $6000-$7FFF is emulated, [[PRG RAM circuit|as implied by the iNES format]].
iNES Mapper 006 is used for ROM images that have been extracted from disk images for the ''Bung (Super) Game Doctor'' or ''Front Fareast Magic Card'' [[RAM cartridge|RAM cartridges]] and that use [[#Mode 1: Custom|Game Doctor Mode 1]] or [[#8 KiB PRG Banking Mode|8 KiB PRG Banking Mode]] (exclusively or non-exclusively). iNES Mapper 008 specifies [[#Mode 4: GNROM|Game Doctor Mode 4]], which makes it a duplicate of [[INES Mapper 066]]. Extracted games that exclusively use the other banking modes can be run using their normal [[iNES]] mapper equivalents, provided that WRAM at $6000-$7FFF is emulated, [[PRG RAM circuit|as implied by the iNES format]].


=Banks=
=Banks=

Revision as of 11:05, 28 May 2020

iNES Mapper 006 is used for ROM images that have been extracted from disk images for the Bung (Super) Game Doctor or Front Fareast Magic Card RAM cartridges and that use Game Doctor Mode 1 or 8 KiB PRG Banking Mode (exclusively or non-exclusively). iNES Mapper 008 specifies Game Doctor Mode 4, which makes it a duplicate of INES Mapper 066. Extracted games that exclusively use the other banking modes can be run using their normal iNES mapper equivalents, provided that WRAM at $6000-$7FFF is emulated, as implied by the iNES format.

Banks

  • CPU $6000-$7FFF: 8 KiB of PRG-RAM. If the iNES header specifies a 512-byte "trainer", it must be loaded to $7000-$71FF, be writable, and (on a hard reset) initialized by JSRing to $7003 before JMPing to the game's reset vector.
  • CPU $8000-$FFFF: 32 KiB of PRG-"ROM", banked in various amounts from 256 KiB total depending on the banking mode.
  • PPU $0000-$1FFF: 8 KiB of CHR-RAM, banked in 8 KiB amounts from 32 KiB total.

Game Doctor Banking Modes

Write-only register at $42FC-$42FF:
A~FEDC BA98 7654 3210  D~7654 3210
  -------------------    ---------
  0100 0010 1111 11bM    BBBM ....
                   |+----|||+------ Set nametable mirroring type
                   |     |||         0: One-screen, page 0
                   |     |||         1: One-screen, page 1
                   |     |||         2: Vertical
                   |     |||         3: Horizontal
                   +-----|||------- 0: PRG-ROM is writeable, latch is disabled
                         |||        1: PRG-ROM is write-protected, latch is enabled
                         +++------- Select Game Doctor Banking mode
  • Because the RAM cartridge has no other means of masking PRG-/CHR-ROM addresses, UNROM vs. UOROM and CNROM-128 vs. CNROM-256 are explicitly differentiated.
  • When changing from a mode that allows changing CHR-RAM banks to one that does not, the previously-chosen CHR-RAM bank remains active.
  • The latch at $8000-$FFFF is only active when PRG-"ROM" is write-protected. A few games temporarily write-enable PRG-"ROM" to change the reset vector after initialization.

Mode 0: UNROM

  • 16 KiB PRG-ROM bank at CPU $8000-$BFFF, switched by D0..D2 of data latch at CPU $8000-$FFFF
  • 16 KiB PRG-ROM bank at CPU $C000-$FFFF, fixed to bank #7
  • 8 KiB of write-enabled CHR-RAM

Mode 1: Custom

A hybrid of UNROM (fixed bank 7), UOROM (256 KiB total PRG-ROM size), and UN1ROM (left shift by 2) with 32 KiB of CHR-RAM.

  • 16 KiB PRG-ROM bank at CPU $8000-$BFFF, switched by D2..D6 of data latch at CPU $8000-$FFFF
  • 16 KiB PRG-ROM bank at CPU $C000-$FFFF, fixed to bank #7
  • 8 KiB write-enabled CHR-RAM bank at PPU $0000-$1FFF, switched by D0..D1 of data latch at CPU $8000-$FFFF

Mode 2: UOROM

  • 16 KiB PRG-ROM bank at CPU $8000-$BFFF, switched by D0..D3 of data latch at CPU $8000-$FFFF
  • 16 KiB PRG-ROM bank at CPU $C000-$FFFF, fixed to bank #15
  • 8 KiB of write-enabled CHR-RAM

Mode 3: Reverse UOROM

  • 16 KiB PRG-ROM bank at CPU $8000-$BFFF, fixed to bank #15
  • 16 KiB PRG-ROM bank at CPU $C000-$FFFF, switched by D0..D3 of data latch at CPU $8000-$FFFF
  • 8 KiB of write-enabled CHR-RAM

Mode 4: GNROM

  • 32 KiB PRG-ROM bank at CPU $8000-$FFFF, switched by D4..D5 of data latch at CPU $8000-$FFFF
  • 8 KiB write-protected CHR-RAM bank at PPU $0000-$1FFF, switched by D0..D1 of data latch at CPU $8000-$FFFF

Mode 5: CNROM-256

  • 32 KiB PRG-ROM bank at CPU $8000-$FFFF, fixed to bank #7
  • 8 KiB write-protected CHR-RAM bank at PPU $0000-$1FFF, switched by D0..D1 of data latch at CPU $8000-$FFFF

Mode 6: CNROM-128

  • 32 KiB PRG-ROM bank at CPU $8000-$FFFF, fixed to bank #3
  • 8 KiB of write-protected CHR-RAM bank at PPU $0000-$1FFF, switched by D0 of data latch at CPU $8000-$FFFF

Mode 7: NROM-256

  • 32 KiB PRG-ROM bank at CPU $8000-$FFFF, fixed to bank #3
  • 8 KiB write-protected CHR-RAM bank at PPU $0000-$1FFF

8 KiB PRG Banking Mode

Write-only register at $43FE-$43FF:
A~FEDC BA98 7654 3210
  -------------------
  0100 0011 1111 111M
                    |
                    +- Enable/Disable 8 KiB PRG Banking Mode
                        0: Enable
                        1: Disable
  • Banks:
    • 8 KiB PRG-ROM bank at CPU $8000-$9FFF, switched by D2..D7 of data latch at CPU $8000-$9FFF
    • 8 KiB PRG-ROM bank at CPU $A000-$BFFF, switched by D2..D7 of data latch at CPU $A000-$BFFF
    • 8 KiB PRG-ROM bank at CPU $C000-$DFFF, switched by D2..D7 of data latch at CPU $C000-$DFFF
    • 8 KiB PRG-ROM bank at CPU $E000-$FFFF, switched by D2..D7 of data latch at CPU $E000-$FFFF
    • 8 KiB CHR-RAM bank at PPU $0000-$1FFF, switched by D0..D1 of data latch at CPU $8000-$FFFF
  • If enabled, it has precedence over the Game Doctor banking modes in everything but CHR-RAM write-protection.
  • The four data latches accept values written even when 8 KiB Banking Mode is not active, and will take effect once $43FE is written to afterwards.

Non-banking registers

FDS Write Data ($4024)

This register is not part of the RAM cartridge, but part of the FDS RAM adapter that originally attached to it. A few games abuse the FDS Disk Data IRQ for frame timing and write any value to this register to acknowledge a pending IRQ.

That technique is necessary because the RAM cartridge, once activated, no longer relays the cartridge connector's M2 signal to the FDS RAM adapter, making its $4020-$4022 IRQ counter unusable. The Disk Data IRQ still works because it is based on the RAM adapter's own clock source.

FDS Control ($4025)

This register is not part of the RAM cartridge, but part of the FDS RAM adapter that originally attached to it. A few games abuse the FDS Disk Data IRQ for frame timing. If bit 7 is set, the FDS RAM adapter will generate IRQs every 1,792 cycles of the 21.4772 MHz master clock, or after every 149+1/3 CPU cycles.

Cycle IRQ Counter Low Byte ($4100)

This is the low byte of a 16-bit counter that, if nonzero, is increased on every M2 cycle and raises an IRQ when the counter flips from $FFFF to $0000. Writing to this register also acknowledges the IRQ.

This register only exists on the Bung Super Game Doctor, not on the original Game Doctor nor on any models from Venus and Front Fareast.

Cycle IRQ Counter High Byte ($4101)

This is the high byte of a 16-bit counter that, if nonzero, is increased on every M2 cycle and raises an IRQ when the counter flips from $FFFF to $0000.

Notes