INES Mapper 030: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (fceux support m030)
(this is a 1:1 mapping with UNROM 512, merging there with redirect)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
mapper 30 is used to designate [[UNROM_512]]
#REDIRECT [[UNROM 512]]
 
{{DEFAULTSORT:030}}[[Category:iNES Mappers]][[Category:Discrete logic mappers]]
The mapper supports up to 512 KB of PRG ROM and up to 32 KB of CHR RAM. 
 
The [[UNIF]] names for this board are UNROM-512-8, UNRROM-512-16 and UNROM-512-32, depending on how much CHR RAM is present.
 
[[NES_2.0|NES 2.0]] is used for specifying how much CHR RAM the rom uses. Default behavior for a iNES headered rom is to enable 32 KB of CHR RAM.
 
If the Battery flag is set, which indicates the mapper is flashable, then no bus conflicts should be emulated. On the other hand, bus conflicts should be emulated if the battery flag is cleared.
 
Mapper controlled one-screen mirroring is only emulated if the Four-Screen mirroring flag is set, otherwise, it is hard-locked on either horizontal or vertical mirroring.
 
mapper 30 is currently only using sub mapper 0.  The other sub mappers are reserved for future use.
 
Supported in FCEUX as of r3071

Latest revision as of 09:01, 9 April 2014

Redirect to: