INES Mapper 033: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Removed dish notes and replaced them by a link, as well as a link to goroh's doc)
m (fix link)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers|033]][[Category:MMC3-like mappers|033]]
[[Category:iNES Mappers|033]][[Category:MMC3-like mappers|033]]
[[iNES Mapper 033]] represents [[Taito_TC0190_pinout|Taito's TC0190]]. It also represents a subset of Taito's TC0350, but the only game we currently know to have used that IC didn't use its interrupt abilities (which are identical to those described on [[iNES Mapper 048]]).
[[iNES Mapper 033]] represents [[Taito_TC0190_pinout|Taito's TC0190]]. It also represents a subset of [[Taito_TC0350_pinout|Taito's TC0350]], but the only game we currently know to have used that IC ( [http://bootgod.dyndns.org:7777/profile.php?id=4025 Don Doko Don] ) didn't use its interrupt abilities (which are identical to those described on [[iNES Mapper 048]]).
 
  Here are Disch's original notes:
  ========================
  =  Mapper 033          =
  ========================
 
 
  Example Games:
  --------------------------
  Akira
  Bakushou!! Jinsei Gekijou
  Don Doko Don
  Insector X
 
 
  Note:
  --------------------------
  Most dumps of [[INES Mapper 048|mapper 048]] games floating around are erroneously labelled as mapper 033.  Mapper 033 does not
  have IRQs, mapper 048 does, and mirroring on each is handled a bit differently.  Apart from that, the two
  are very similar.
 
 
  Registers:
  --------------------------
 
  Range,Mask:  $8000-BFFF, $A003
 
    $8000 [.MPP PPPP]
      M = Mirroring (0=Vert, 1=Horz)
      P = PRG Reg 0 (8k @ $8000)
 
    $8001 [..PP PPPP]  PRG Reg 1 (8k @ $A000)
    $8002 [CCCC CCCC]  CHR Reg 0 (2k @ $0000)
    $8003 [CCCC CCCC]  CHR Reg 1 (2k @ $0800)
    $A000 [CCCC CCCC]  CHR Reg 2 (1k @ $1000)
    $A001 [CCCC CCCC]  CHR Reg 3 (1k @ $1400)
    $A002 [CCCC CCCC]  CHR Reg 4 (1k @ $1800)
    $A003 [CCCC CCCC]  CHR Reg 5 (1k @ $1C00)
 
 
  PRG Setup:
  ---------------------------
 
        $8000  $A000  $C000  $E000 
      +-------+-------+-------+-------+
      | $8000 | $8001 | { -2} | { -1} |
      +-------+-------+-------+-------+
 
 
  CHR Setup:
  ---------------------------
 
        $0000  $0400  $0800  $0C00  $1000  $1400  $1800  $1C00
      +---------------+---------------+-------+-------+-------+-------+
      |    $8002    |    $8003    | $A000 | $A001 | $A002 | $A003 |
      +---------------+---------------+-------+-------+-------+-------+


Note that unlike the MMC3, the value written for the two 2 KiB CHR banks do not drop the LSB; the number written specifies the offset into CHR as a multiple of 2 KiB. Furthermore, it turns out the MSB of the register is implemented (even if no games ever used it) and the two 2 KiB CHR banks can address a full 512 KiB of CHR. (The four 1 KiB CHR banks are limited to the first 256 KiB of CHR)
Note that unlike the MMC3, the value written for the two 2 KiB CHR banks do not drop the LSB; the number written specifies the offset into CHR as a multiple of 2 KiB. Furthermore, it turns out the MSB of the register is implemented (even if no games ever used it) and the two 2 KiB CHR banks can address a full 512 KiB of CHR. (The four 1 KiB CHR banks are limited to the first 256 KiB of CHR)
The TC0190 also showed up in a few arcade games using [//github.com/mamedev/mame/blob/master/src/mame/taito/taito_f2.cpp#L57 Taito's F2 hardware].


== See also ==
== See also ==
* [http://nesdev.org/taito-j.txt Taito mapper] by goroh (japanese)
* [http://nesdev.org/taito-j.txt Taito mapper] by goroh (japanese)
* [http://www.romhacking.net/documents/362/ NES mapper list] by Dish
* [http://www.romhacking.net/documents/362/ NES mapper list] by Disch

Latest revision as of 07:56, 24 February 2024

iNES Mapper 033 represents Taito's TC0190. It also represents a subset of Taito's TC0350, but the only game we currently know to have used that IC ( Don Doko Don ) didn't use its interrupt abilities (which are identical to those described on iNES Mapper 048).

 Here are Disch's original notes:
 ========================
 =  Mapper 033          =
 ========================
 
 
 Example Games:
 --------------------------
 Akira
 Bakushou!! Jinsei Gekijou
 Don Doko Don
 Insector X
 
 
 Note:
 --------------------------
 Most dumps of mapper 048 games floating around are erroneously labelled as mapper 033.  Mapper 033 does not
 have IRQs, mapper 048 does, and mirroring on each is handled a bit differently.  Apart from that, the two
 are very similar.
 
 
 Registers:
 --------------------------
 
 Range,Mask:   $8000-BFFF, $A003
 
   $8000 [.MPP PPPP]
     M = Mirroring (0=Vert, 1=Horz)
     P = PRG Reg 0 (8k @ $8000)
 
   $8001 [..PP PPPP]   PRG Reg 1 (8k @ $A000)
   $8002 [CCCC CCCC]   CHR Reg 0 (2k @ $0000)
   $8003 [CCCC CCCC]   CHR Reg 1 (2k @ $0800)
   $A000 [CCCC CCCC]   CHR Reg 2 (1k @ $1000)
   $A001 [CCCC CCCC]   CHR Reg 3 (1k @ $1400)
   $A002 [CCCC CCCC]   CHR Reg 4 (1k @ $1800)
   $A003 [CCCC CCCC]   CHR Reg 5 (1k @ $1C00)
 
 
 PRG Setup:
 ---------------------------
 
       $8000   $A000   $C000   $E000  
     +-------+-------+-------+-------+
     | $8000 | $8001 | { -2} | { -1} |
     +-------+-------+-------+-------+
 
 
 CHR Setup:
 ---------------------------
 
       $0000   $0400   $0800   $0C00   $1000   $1400   $1800   $1C00 
     +---------------+---------------+-------+-------+-------+-------+
     |     $8002     |     $8003     | $A000 | $A001 | $A002 | $A003 |
     +---------------+---------------+-------+-------+-------+-------+

Note that unlike the MMC3, the value written for the two 2 KiB CHR banks do not drop the LSB; the number written specifies the offset into CHR as a multiple of 2 KiB. Furthermore, it turns out the MSB of the register is implemented (even if no games ever used it) and the two 2 KiB CHR banks can address a full 512 KiB of CHR. (The four 1 KiB CHR banks are limited to the first 256 KiB of CHR)


The TC0190 also showed up in a few arcade games using Taito's F2 hardware.

See also