INES Mapper 052

From NESdev Wiki
Revision as of 08:22, 28 November 2022 by NewRisingSun (talk | contribs) (Rewrite for brevity; describe two variants)
Jump to navigationJump to search

iNES Mapper 052 denotes the Realtec 8213 and similar MMC3-based multicart circuit boards.

Outer Bank Register ($6000-$7FFF, write)

D~[LTCc SBPp]
   |||| ||++-- PRG A18..A17
   |||| |+---- PRG/CHR A19
   |||| +----- PRG A17 mode: 0=from MMC3, 1=from p
   ||++------- CHR A18..A17
   |+--------- CHR A17 mode: 0=from MMC3, 1=from c
   +---------- 1=Lock Outer Bank register until next reset
Value on reset: $00

The MMC3's WRAM interface must be enabled and writeable in MMC3 register $A001. The Outer Bank Register overlaps any actual PRG RAM that may be present.

Mixed CHR ROM/CHR RAM variants

Nestopia Plus! has defined Submapper 13 to denote a PCB variant with 512 KiB of each PRG ROM and CHR ROM that can switch between regular CHR ROM and 8 KiB unbanked CHR RAM. CHR RAM is selected when PRG A17 and PRG A18 are both =1.

Nestopia Plus! further uses Submapper 13 to denote the (AB-128) Well 8-in-1 multicart with 1 MiB of each PRG ROM and CHR ROM, which is incompatible to the above definition, and which is hereby reassigned to Submapper 14. Its Outer Bank Register has the following form:

D~[LTRc SBBp]
   |||| |||+-- PRG A18..A17
   |||| |++--- PRG/CHR A19..A18
   |||| +----- PRG A17 mode: 0=from MMC3, 1=from p
   |||+------- CHR A17
   ||+-------- 0=CHR-ROM, 1=CHR RAM
   |+--------- CHR A17 mode: 0=from MMC3, 1=from c
   +---------- 1=Lock Outer Bank register until next reset

See also