INES Mapper 076: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (add mmc3-like subcat to this n108-based mapper.)
m (RE'd board. Read nestopia source. Remove crazy.)
Line 1: Line 1:
[[Category:iNES Mappers]][[Category:MMC3-like mappers]]
[[Category:iNES Mappers]][[Category:MMC3-like mappers]]
  Here are Disch's original notes: 
   ========================
   ========================
   =  Mapper 076          =
   =  Mapper 076          =
Line 13: Line 12:
   Notes:
   Notes:
   ---------------------------
   ---------------------------
   PRG Swapping on this mapper defies logic. I don't know if this is accurate, but it appears to work.
   This board combines the [[iNES Mapper 206|Namcot 108]] mapper IC with a [[7432]] to increase CHR to
  128k. The OR gate is only there to permit the use of a 28-pin ROM for CHR. The
  trade off is the inflation of the 1k CHR banks to 2k.
    
    
    
    
Line 22: Line 23:
    
    
    
    
     $8000:  [.P.. .AAA]
     $8000:  [.... .AAA]
      P = PRG register select (see PRG setup)
       A = Address for use with $8001
       A = Address for use with $8001
    
    
    
    
     $8001:  [DDDD DDDD]    Data port:
     $8001:  [..DD DDDD]    Data port:
         R:2 ->  CHR reg 0  (2k @ $0000)
         R:2 ->  CHR reg 0  (2k @ $0000)
         R:3 ->  CHR reg 1  (2k @ $0800)
         R:3 ->  CHR reg 1  (2k @ $0800)
         R:4 ->  CHR reg 2  (2k @ $1000)
         R:4 ->  CHR reg 2  (2k @ $1000)
         R:5 ->  CHR reg 3  (2k @ $1800)
         R:5 ->  CHR reg 3  (2k @ $1800)
         R:6 ->  PRG reg 0 or 2 (depending on 'P' bit in $8000)
         R:6 ->  PRG reg 0  (8k @ $8000)
         R:7 ->  PRG reg 1
         R:7 ->  PRG reg 1 (8k @ $a000)
 
 
    $A000:  [.... ...M]
      Mirroring:  0=Vert
                  1=Horz
    
    
   CHR Setup:
   CHR Setup:
Line 51: Line 46:
   PRG Setup:
   PRG Setup:
   ---------------------------
   ---------------------------
 
  R:6 actually seems to access two seperate regs.  Therefore, unlike the typical MMC3-style setup, $8000 and
  $C000 are both independently selectable.  When R:6 is written to, the 'P' bit determines which reg gets
  changed:
 
  P=0:  PRG reg 0  (8k @ $8000 --  "R:6a" below)
  P=1:  PRG reg 2  (8k @ $C000 --  "R:6b" below)
    
    
         $8000  $A000  $C000  $E000   
         $8000  $A000  $C000  $E000   
       +-------+-------+-------+-------+
       +-------+-------+-------+-------+
       |  R:6a |  R:7  | R:6b | { -1} |
       |  R:6  |  R:7  | { -2} | { -1} |
       +-------+-------+-------+-------+
       +-------+-------+-------+-------+
 
 
 
  Powerup:
  ---------------------------
 
  R:6b seems to be reset to $FE on powerup.  The game does rely on this.

Revision as of 20:10, 11 June 2012

 ========================
 =  Mapper 076          =
 ========================
 
 
 Example Games:
 --------------------------
 Digital Devil Story - Megami Tensei
 
 
 Notes:
 ---------------------------
 This board combines the Namcot 108 mapper IC with a 7432 to increase CHR to 
 128k. The OR gate is only there to permit the use of a 28-pin ROM for CHR. The
 trade off is the inflation of the 1k CHR banks to 2k.  
 
 
 Registers:
 ---------------------------
 
 Range,Mask:   $8000-FFFF, $E001
 
 
   $8000:  [.... .AAA]
     A = Address for use with $8001
 
 
   $8001:  [..DD DDDD]    Data port:
       R:2 ->  CHR reg 0  (2k @ $0000)
       R:3 ->  CHR reg 1  (2k @ $0800)
       R:4 ->  CHR reg 2  (2k @ $1000)
       R:5 ->  CHR reg 3  (2k @ $1800)
       R:6 ->  PRG reg 0  (8k @ $8000)
       R:7 ->  PRG reg 1  (8k @ $a000)
 
 CHR Setup:
 ---------------------------
 
       $0000   $0400   $0800   $0C00   $1000   $1400   $1800   $1C00 
     +---------------+---------------+---------------+---------------+
     |      R:2      |      R:3      |      R:4      |      R:5      |
     +---------------+---------------+---------------+---------------+
 
 
 PRG Setup:
 ---------------------------
 
       $8000   $A000   $C000   $E000  
     +-------+-------+-------+-------+
     |  R:6  |  R:7  | { -2} | { -1} |
     +-------+-------+-------+-------+
Retrieved from "https://www.nesdev.org/w/index.php?title=INES_Mapper_076&oldid=4529"