INES Mapper 078: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (italicize game names)
m (mention 4-screen VRAM flag, originally used to distinguish these two)
Line 27: Line 27:


The two mirroring modes are not compatible, and trying to run either game with the other's hardware will produce major graphical glitching or lockups.  They were likely combined into the same mapper due to a misunderstanding of 4-screen mirroring.  To run either game totally correctly requires the mirroring setup shown here.
The two mirroring modes are not compatible, and trying to run either game with the other's hardware will produce major graphical glitching or lockups.  They were likely combined into the same mapper due to a misunderstanding of 4-screen mirroring.  To run either game totally correctly requires the mirroring setup shown here.
Pre-NES 2.0 ROM image headers set the 4-screen VRAM flag for Holy Diver and cleared it for Cosmo Carrier.


== Hardware ==
== Hardware ==

Revision as of 20:11, 28 June 2022

iNES Mapper 078 was used for two games: Holy Diver and Uchuusen - Cosmo Carrier.

Overview

  • PRG ROM size: 128 KiB
  • PRG ROM bank size: 16 KiB
  • PRG RAM: No
  • CHR capacity: 128KiB ROM
  • CHR bank size: 8 KiB
  • Nametable mirroring: Mapper controlled
  • Subject to bus conflicts: Yes

Banks

  • CPU $8000-$BFFF: 16KiB switchable PRG ROM bank
  • CPU $C000-$FFFF: Fixed to last 16KiB of PRG ROM
  • PPU $0000-$1FFF: 8KiB switchable CHR ROM bank

Registers

Bank Select ($8000-$FFFF)

7  bit  0
---- ----
CCCC MPPP
|||| ||||
|||| |+++-- Select 16 KiB PRG ROM bank for CPU $8000-$BFFF
|||| +----- Mirroring.  Holy Diver: 0 = H, 1 = V.  Cosmo Carrier: 0 = 1scA, 1 = 1scB.
++++------- Select 8KiB CHR ROM bank for PPU $0000-$1FFF

The two mirroring modes are not compatible, and trying to run either game with the other's hardware will produce major graphical glitching or lockups. They were likely combined into the same mapper due to a misunderstanding of 4-screen mirroring. To run either game totally correctly requires the mirroring setup shown here.

Pre-NES 2.0 ROM image headers set the 4-screen VRAM flag for Holy Diver and cleared it for Cosmo Carrier.

Hardware

In both cases, the hardware implementation is simply a CNROM and a UNROM put together. Two 74HC161 are used to form an 8 bit latch, with 4 bits connecting the CHR ROM's high address lines, and 3 bits connecting to a 74HC32, which provides the logic to fix the top bank of PRG ROM while swapping the first 16KiB. The last latched bit is connected directly to CIRAM A10 on Cosmo Carrier, as in AxROM. On Holy Diver, that bit is connected to a 74HC00, which serves as a 2:1 mux of PPU A10 and PPU A11 into CIRAM A10 to provide the desired mirroring. Holy Diver also contains a 74HC245 to compensate for a slow CHR ROM chip.

For homebrew, both Nestopia-1.4.0 and FCEUX-2.1.5 default to the 1scA/1scB mirroring provided by Uchuusen. Emulators SHOULD support NES 2.0 submappers: 1 for Uchuusen and 3 for Holy Diver.

See also