INES Mapper 187: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Garō Densetsu Special (Kǎshèng re-release) is actually INES Mapper 115, allowing the removal of an ugly heuristic from Mapper 187's definition.)
m (fix doubled "the")
 
(One intermediate revision by one other user not shown)
Line 6: Line 6:
=Registers=
=Registers=
==NROM Override Register ($5000)==
==NROM Override Register ($5000)==
  Mask: Unknown, probably $F000
  Mask: $F001
   
   
  D~7654 3210
  D~7654 3210
Line 33: Line 33:
               1: CHR A18=PPU A12
               1: CHR A18=PPU A12


Basically, either sprites or background tiles will come from the the second 256 KiB of CHR-ROM. Note that setting bit 7 will still also activate the MMC3 clone's CHR A12 inversion.
Basically, either sprites or background tiles will come from the second 256 KiB of CHR-ROM. Note that setting bit 7 will still also activate the MMC3 clone's CHR A12 inversion.


==MMC3-compatible registers ($8000-$FFFF)==
==MMC3-compatible registers ($8000-$FFFF)==

Latest revision as of 07:38, 9 January 2022

iNES Mapper 187 is used for the 卡聖 (Kǎshèng) A98402 and similar boards, an MMC3-clone-bearing board with an NROM-like PRG-ROM register that can override the MMC3 clone's PRG-ROM bank, and supports 512 KiB of CHR-ROM. Used by:

  • Street Fighter Zero 2 (Kǎshèng/Hummer Team, not Street Fighter Zero 2 '97)
  • The King of Fighters '96 (Kǎshèng/Hummer Team)

Registers

NROM Override Register ($5000)

Mask: $F001

D~7654 3210
  ---------
  M.NB BBb.
  | |+-+++-- Select 16 KiB PRG-ROM bank at CPU
  | |        $8000-$BFFF and $C000-$FFFF
  | +------- 0: Do not replace bit 1 (NROM-128)
  |          1: Replace bit 1 with CPU A14 (NROM-256)
  +--------- 0: Use PRG bank from MMC3; ignore $5000 bits 1-4/5
             1: Ignore PRG bank from MMC3; apply $5000 bits 1-4/5

Protection Read ($5000-$5FFF)

Mask: Unknown

The actual values that are returned are unknown; The King of Fighters '96 reads from here and only expects bit 7 of the value being returned to be set.

CHR A18 Control ($8000-$9FFF, even)

Mask: $E001

D~7654 3210
  ---------
  M... ....
  +--------- Select CHR A18 Mode
              0: CHR A18=inverted PPU A12
              1: CHR A18=PPU A12

Basically, either sprites or background tiles will come from the second 256 KiB of CHR-ROM. Note that setting bit 7 will still also activate the MMC3 clone's CHR A12 inversion.

MMC3-compatible registers ($8000-$FFFF)

Mask: $E001, see MMC3.

Errata

Similar Mappers

  • iNES Mappers 115 and 123 have similar NROM override registers, with Mapper 123's bits arranged a bit differently.
  • iNES Mapper 121 has the same CHR A18 behavior, drops the NROM override register, and adds more complex protection.