INES Mapper 227: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Created page with "Category:iNES Mappers Here are Disch's original notes: ======================== = Mapper 227 = ======================== Example Game: ----------…")
 
No edit summary
 
(21 intermediate revisions by 6 users not shown)
Line 1: Line 1:
[[Category:iNES Mappers]]
{{DEFAULTSORT:227}}[[Category:iNES Mappers]][[Category:Multicart mappers]][[Category:Mappers with CHR RAM]]
  Here are Disch's original notes: 
'''iNES Mapper 227''' denotes an address-latch-based multicart circuit board (PCB code '''810449-C-A1''' among others) mounting 1 MiB of PRG-ROM plus 8 KiB of unbanked CHR-RAM.
  ========================
 
  =  Mapper 227         =
A variant used by Chinese RPGs from Nanjing, Waixing (PCB code '''FW-01''') and Yancheng adds 8 KiB battery-backed WRAM and does not implement the UNROM-like bankswitching modes.
  ========================
 
 
Other PCB that use this mapper :
 
* '''N120-72''' : ''[[1992 Contra 120 in 1]]'' multicart.
  Example Game:
 
  --------------------------
Nestopia Plus! has defined submappers 0 and 1, '''submapper 0''' denoting that CHR-RAM is ''not'' write-protected in NROM modes (for use with Chinese RPGs), '''submapper 1''' denoting that CHR-RAM ''is'' write-protected in NROM modes (for use with multicarts).
  1200-in-1
 
 
==Address Latch ($8000-$FFFF, write)==
 
  [A~1... .mLQ OQQP PpMS]
  Notes:
          ||| |||| |||+-0: PRG A14=p
  ---------------------------
          ||| |||| |||  1: PRG A14=CPU A14
  This mapper has 8k CHR-RAM, and also has the ability to write protect it's CHR-RAM!
          ||| |||| ||+- 0: Vertical mirroring
 
          ||| |||| ||   1: Horizontal mirroring
 
          ||| |||+-++-- PRG A16..A14 (inner bank)
  Registers:
          ||+-|++------ PRG A19..A17 (outer bank)
  ---------------------------
          || +-------- 0: When CPU A14=1: PRG A16..14=LLL
 
          ||           1: When CPU A14=1: PRG A16..14=PPp
    $8000-FFFF: A~[.... ..LP  OPPP PPMS]
          |+----------- Value for PRG A16..14 when CPU A14=1 and O=0
      L = Last PRG Page Mode
          +------------ 0: PRG A3..A0=CPU A3..A0
      P = PRG Reg
                        1: PRG A3..A0=Solder pad 3-0
      O = Mode
Power-on value: 0
      M = Mirroring (0=Vert, 1=Horz)
 
      S = PRG Size
Effective meaning:
    
  Bit 9  Bit 7  Bit 0   Meaning
 
$200s   $080s   $001s
  Setup:
   (L)    (O)    (S)
  ---------------------------
  0      0      0    Switchable inner 16 KiB bank PPp at CPU $8000-$BFFF, fixed inner bank #0 at CPU $C000-$FFFF (UNROM-like with fixed bank 0)
 
  0      0      1    Switchable inner 16 KIB bank PP0 at CPU $8000-$BFFF, fixed inner bank #0 at CPU $C000-$FFFF (UNROM-like with only even banks reachable, pointless)
  When 'O' is set, CHR-RAM is write protected (writes have no effect).  'O' also changes the PRG mode.
  1      0       0     Switchable inner 16 KiB bank PPp at CPU $8000-$BFFF, fixed inner bank #7 at CPU $C000-$FFFF (UNROM)
 
  1      0       1    Switchable inner 16 KIB bank PP0 at CPU $8000-$BFFF, fixed inner bank #7 at CPU $C000-$FFFF (UNROM with only even banks reachable, pointless)
  Note there is funky ANDs and ORs going on below depending on the modes:
  ?      1      0    Switchable 16 KiB inner bank PPp at CPU $8000-$BFFF, mirrored at CPU $C000-$FFFF (NROM-128)
 
  ?      1      1    Switchable 32 KiB inner bank PP at CPU $8000-$FFFF (NROM-256)
 
 
                    $8000  $A000  $C000  $E000  
* On multicart PCBs (no battery or '''submapper 1'''), CHR-RAM is write-protected when O=1 and write-enabled when O=0, i.e. write-protected in the NROM-128 and NROM-256 modes.
                  +---------------+---------------+
* When the ''m'' bit is set, PRG A3-A0 are replaced with the values of four solder pads, which when the menu code reads particular ROM locations effectively selects one of up to sixteen menus with different game counts.
  O=1, S=0:      |       P      |       P      |
* Because all bits are cleared on reset, both CPU $8000-$BFFF and $C000-$FFFF are set to 16 KiB bank #0 on reset.
                  +-------------------------------+
 
  O=1, S=1:       |            < P >            |
==Similar mappers==
                  +-------------------------------+
* [[INES Mapper 242]] is a variant with only up to 512 KiB PRG-ROM that moves the ''m'' bit to a different bit location. A variant with two PRG-ROM chips exists as well.
  O=0, S=0, L=0:  |      P      |  P AND $38  |
* [[NES 2.0 Mapper 375]] is a variant with up to 2 MiB PRG-ROM that allows the UNROM-like switchable bank to be changed via a data latch.
                  +---------------+---------------+
* [[NES 2.0 Mapper 380]] is an incompatible variant with similar functionality.
  O=0, S=1, L=0:  |   P AND $3E   |   P AND $38   |
* [[NES 2.0 Mapper 449]] is an incompatible variant that adds 32 KiB CHR-RAM bankswitching functionality.
                  +---------------+---------------+
 
  O=0, S=0, L=1:  |       P       |  P  OR $07  |
==See also==
                  +---------------+---------------+
* Dumping thread: https://forums.nesdev.org/viewtopic.php?f=9&t=15271
  O=0, S=1, L=1: |  P AND $3E  |  P  OR $07  |
                  +---------------+---------------+

Latest revision as of 15:23, 26 March 2023

iNES Mapper 227 denotes an address-latch-based multicart circuit board (PCB code 810449-C-A1 among others) mounting 1 MiB of PRG-ROM plus 8 KiB of unbanked CHR-RAM.

A variant used by Chinese RPGs from Nanjing, Waixing (PCB code FW-01) and Yancheng adds 8 KiB battery-backed WRAM and does not implement the UNROM-like bankswitching modes.

Other PCB that use this mapper :

Nestopia Plus! has defined submappers 0 and 1, submapper 0 denoting that CHR-RAM is not write-protected in NROM modes (for use with Chinese RPGs), submapper 1 denoting that CHR-RAM is write-protected in NROM modes (for use with multicarts).

Address Latch ($8000-$FFFF, write)

[A~1... .mLQ OQQP PpMS]
         ||| |||| |||+-0: PRG A14=p
         ||| |||| |||  1: PRG A14=CPU A14
         ||| |||| ||+- 0: Vertical mirroring
         ||| |||| ||   1: Horizontal mirroring
         ||| |||+-++-- PRG A16..A14 (inner bank)
         ||+-|++------ PRG A19..A17 (outer bank)
         ||  +-------- 0: When CPU A14=1: PRG A16..14=LLL
         ||            1: When CPU A14=1: PRG A16..14=PPp
         |+----------- Value for PRG A16..14 when CPU A14=1 and O=0
         +------------ 0: PRG A3..A0=CPU A3..A0
                       1: PRG A3..A0=Solder pad 3-0
Power-on value: 0

Effective meaning:

Bit 9   Bit 7   Bit 0   Meaning
$200s   $080s   $001s
 (L)     (O)     (S)
  0       0       0     Switchable inner 16 KiB bank PPp at CPU $8000-$BFFF, fixed inner bank #0 at CPU $C000-$FFFF (UNROM-like with fixed bank 0)
  0       0       1     Switchable inner 16 KIB bank PP0 at CPU $8000-$BFFF, fixed inner bank #0 at CPU $C000-$FFFF (UNROM-like with only even banks reachable, pointless)
  1       0       0     Switchable inner 16 KiB bank PPp at CPU $8000-$BFFF, fixed inner bank #7 at CPU $C000-$FFFF (UNROM)
  1       0       1     Switchable inner 16 KIB bank PP0 at CPU $8000-$BFFF, fixed inner bank #7 at CPU $C000-$FFFF (UNROM with only even banks reachable, pointless)
  ?       1       0     Switchable 16 KiB inner bank PPp at CPU $8000-$BFFF, mirrored at CPU $C000-$FFFF (NROM-128)
  ?       1       1     Switchable 32 KiB inner bank PP at CPU $8000-$FFFF (NROM-256)
  • On multicart PCBs (no battery or submapper 1), CHR-RAM is write-protected when O=1 and write-enabled when O=0, i.e. write-protected in the NROM-128 and NROM-256 modes.
  • When the m bit is set, PRG A3-A0 are replaced with the values of four solder pads, which when the menu code reads particular ROM locations effectively selects one of up to sixteen menus with different game counts.
  • Because all bits are cleared on reset, both CPU $8000-$BFFF and $C000-$FFFF are set to 16 KiB bank #0 on reset.

Similar mappers

  • INES Mapper 242 is a variant with only up to 512 KiB PRG-ROM that moves the m bit to a different bit location. A variant with two PRG-ROM chips exists as well.
  • NES 2.0 Mapper 375 is a variant with up to 2 MiB PRG-ROM that allows the UNROM-like switchable bank to be changed via a data latch.
  • NES 2.0 Mapper 380 is an incompatible variant with similar functionality.
  • NES 2.0 Mapper 449 is an incompatible variant that adds 32 KiB CHR-RAM bankswitching functionality.

See also