KC5373B-010 pinout: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
m (protocol-relative URLs) |
Rainwarrior (talk | contribs) m (Category:Pinouts) |
||
| Line 18: | Line 18: | ||
The role of other signals (CIC-TO-PAK, CIC-TO-MB, CIC-CLK) is open question. | The role of other signals (CIC-TO-PAK, CIC-TO-MB, CIC-CLK) is open question. | ||
[[Category:Pinouts]] | |||
Revision as of 04:01, 6 October 2022
.--v--.
CIC-TO-PAK -> |01 16| (*)
PPU-A0 -> |02 15| --[C]-> CIC-TO-MB
VCC -- |03 14| <- \___ one of those pins connects to CIC-CLK
VCC -- |04 13| <- /
GND -- |05 12| -- VCC
+-- |06 11| --+
+-- |07 10| --+
+-- |08 09| --+
| '-----' |
+-------------+--[charge pump] -> CIC-RST
*Pin 16 is ither tied to pin 15 or left floating, depending on the board
This chip was found in many NES NTDEC games and acted like CIC stun [1], [2]
It's exact behviour is unknown, but PPU-A0 is probably a source of high frequency signal, whose current is amplified and available on pins 6-11. Next, going through charge pump, a negative voltage of around -4V is produced which disables NES' internal CIC.
The role of other signals (CIC-TO-PAK, CIC-TO-MB, CIC-CLK) is open question.
