MOD RF: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (→‎Parts List: air coil inductors are usually not very inductive, add missing µ s)
 
(6 intermediate revisions by 2 users not shown)
Line 4: Line 4:
===Alps===
===Alps===
====Parts List====
====Parts List====
Note:  Surface-mount and uninstalled components are not listed
*C19-20:  R 472M 4700pF 2KV ceramic disc capacitors
*C21:  2200µF 25V electrolytic capacitor
*C23:  100µF 25V electrolytic capacitor
*C25:  100µF 10V electrolytic capacitor
*C29,C35:  1µF 50V electrolytic capacitors
*C36:  10µF 16V electrolytic capacitor
*D1-4:  "N 8" rectifier diodes
*L1:  2.2µH 20% inductor
*L3:  0.48µH hand-wound inductor
*L4:  0.39µH hand-wound inductor
*L6:  0.32µH hand-wound inductor
*L8:  220nH inductor
*L9:  68µH 20% inductor
*L?:  0.1µH hand-wound inductor
*Q1,Q4-5:  2SC1740 NPN transistor
*Q2:  2SC461 NPN transistor (Must use VHF-capable speeds if substituting)
*R7:  15K Ohms 5% resistor
*R19:  1K Ohms 5% resistor
*R20:  1.8K Ohms 5% resistor
*R22:  10K Ohms 5% resistor
*R24:  105 Ohms 5% resistor
*R25:  82 Ohms 5% resistor
====Schematics====
====Schematics====
[[File:GLEEOfl_full.jpg]]
[[Image:GLEEOfl_full.jpg|200px]]
Components as placed on non-solder side of board.
Components as placed on non-solder (through-hole component) side of board.


===Mitsumi===
===Mitsumi===
====Parts List====
====Parts List====
====Schematics====
====Schematics====

Latest revision as of 00:44, 15 October 2014

This is a description of the daughterboard attached to the main NES logic board with a 5-pin soldered header.

Versions

Alps

Parts List

Note: Surface-mount and uninstalled components are not listed

  • C19-20: R 472M 4700pF 2KV ceramic disc capacitors
  • C21: 2200µF 25V electrolytic capacitor
  • C23: 100µF 25V electrolytic capacitor
  • C25: 100µF 10V electrolytic capacitor
  • C29,C35: 1µF 50V electrolytic capacitors
  • C36: 10µF 16V electrolytic capacitor
  • D1-4: "N 8" rectifier diodes
  • L1: 2.2µH 20% inductor
  • L3: 0.48µH hand-wound inductor
  • L4: 0.39µH hand-wound inductor
  • L6: 0.32µH hand-wound inductor
  • L8: 220nH inductor
  • L9: 68µH 20% inductor
  • L?: 0.1µH hand-wound inductor
  • Q1,Q4-5: 2SC1740 NPN transistor
  • Q2: 2SC461 NPN transistor (Must use VHF-capable speeds if substituting)
  • R7: 15K Ohms 5% resistor
  • R19: 1K Ohms 5% resistor
  • R20: 1.8K Ohms 5% resistor
  • R22: 10K Ohms 5% resistor
  • R24: 105 Ohms 5% resistor
  • R25: 82 Ohms 5% resistor

Schematics

GLEEOfl full.jpg Components as placed on non-solder (through-hole component) side of board.

Mitsumi

Parts List

Schematics