Mask ROM pinout: Revision history

15 August 2022

• curprev 18:0118:01, 15 August 2022‎ Kmg talk contribs‎ m 8,447 bytes −1‎ →‎Nintendo AOROM PRG ROM pinout - 128/256/KBytes (32pin): typo
• curprev 15:2415:24, 15 August 2022‎ Krzysiobal talk contribs‎ 8,448 bytes +55‎ +source
• curprev 15:2315:23, 15 August 2022‎ Krzysiobal talk contribs‎ 8,393 bytes +227‎ +After Burner notes

12 June 2021

• curprev 19:2819:28, 12 June 2021‎ Krzysiobal talk contribs‎ 8,166 bytes +236‎ +STROM

11 March 2021

• curprev 21:1021:10, 11 March 2021‎ Trozze talk contribs‎ m 7,930 bytes +20‎ Pin 22 is GND on CHR, pin31 should be used

15 July 2019

• curprev 21:2521:25, 15 July 2019‎ Lidnariq talk contribs‎ 7,910 bytes −106‎ →‎Nintendo AOROM PRG ROM pinout - 128/256/KBytes (32pin): remove redundant "PRG" label on every pin, since it's stated in the lede, so that we can avoid labeling the pin "PRG /CE"

27 August 2018

• curprev 09:3409:34, 27 August 2018‎ Trozze talk contribs‎ m 8,016 bytes 0‎ Pin 2 on CHR should be /OE

11 March 2018

• curprev 14:2814:28, 11 March 2018‎ Tepples talk contribs‎ 8,016 bytes +61‎ →‎Signal descriptions: what OE stands for; faster response was backward

22 May 2016

• curprev 18:2818:28, 22 May 2016‎ Tepples talk contribs‎ 7,955 bytes +86‎ →‎See also: SNROM to SUROM

29 April 2016

• curprev 18:0818:08, 29 April 2016‎ Lidnariq talk contribs‎ 7,869 bytes −102‎ →‎128/256/512 KBytes (28/32pin) ROMs: remove widening and incoherent comment about "X address lines are from X bus"

16 May 2015

• curprev 19:1019:10, 16 May 2015‎ Tepples talk contribs‎ 7,971 bytes +124‎ →‎See also: Callan Brown's tutorial, suggested by getafixx in http://forums.nesdev.com/viewtopic.php?p=147615#p147615

21 April 2015

• curprev 09:3009:30, 21 April 2015‎ Bregalad talk contribs‎ 7,847 bytes +171‎ Imports links from NESDEV main page

6 March 2015

• curprev 21:4121:41, 6 March 2015‎ Tepples talk contribs‎ 7,676 bytes +32‎ →‎Signal descriptions: that new stuff should probably be in its own section
• curprev 13:2913:29, 6 March 2015‎ Tepples talk contribs‎ 7,644 bytes +644‎ →‎Signal descriptions: Explanation of /CE and /OE; short explanation of conversion (requested by koitsu)

21 January 2015

• curprev 07:3107:31, 21 January 2015‎ Lidnariq talk contribs‎ m 7,000 bytes −30‎ →‎128/256/512 KBytes (28/32pin) ROMs: fix grammar

6 May 2014

• curprev 08:0308:03, 6 May 2014‎ Lidnariq talk contribs‎ m 7,030 bytes +53‎ →‎Nintendo RROM CHR ROM pinout - 8 KBytes (28pin): link to RROM board

6 February 2014

• curprev 06:5606:56, 6 February 2014‎ Bregalad talk contribs‎ m 6,977 bytes +1‎ →‎8kB / 16kB / 32kB / 64kBytes (28pin) ROMs: byes -> bytes

11 March 2013

• curprev 21:2421:24, 11 March 2013‎ Lidnariq talk contribs‎ 6,976 bytes −248‎ →‎128/256/512 KBytes (28/32pin) ROMs: NesCartDB knows of 790 games with 32-pin 128KB ROMs on games with 128 KiB PRG, and 1345 games with 28-pin 128KB ROMs; 28-pin 128KB ROMs were the rule, not the exception.

7 March 2013

• curprev 00:4100:41, 7 March 2013‎ Lidnariq talk contribs‎ 7,224 bytes −65‎ →‎Nintendo SLRROM, SL1ROM, TL1ROM pinouts: remove section: The ROMs themselves are normal 128KiB 28-pin pinouts.

4 February 2013

• curprev 19:3319:33, 4 February 2013‎ Lidnariq talk contribs‎ m 7,289 bytes 0‎ →‎Nintendo SROM CHR ROM pinout - 8 KBytes (24pin): CHR→PPU because it's "from the PPU" instead of "to the CHR"

30 January 2013

• curprev 19:0219:02, 30 January 2013‎ Freem talk contribs‎ 7,289 bytes +22‎ add to Pinouts category

10 May 2012

• curprev 22:3922:39, 10 May 2012‎ Lidnariq talk contribs‎ m 7,267 bytes +8‎ →‎Nintendo SROM CHR ROM pinout - 8 KBytes (24pin): actually, srom's pinout was a standard one.
• curprev 19:4419:44, 10 May 2012‎ Lidnariq talk contribs‎ 7,259 bytes +669‎ →‎Nintendo SROM CHR ROM pinout - 8 KBytes (24pin): Traced the pinout from pictures in bootgod's db. Figured out pins 2-11,21 by deduction instead of directly tracing

31 March 2012

• curprev 00:5400:54, 31 March 2012‎ Lidnariq talk contribs‎ m 6,590 bytes 0‎ →‎Signal descriptions: fix typo

9 February 2012

• curprev 22:1322:13, 9 February 2012‎ Bregalad talk contribs‎ 6,590 bytes +336‎ Oops, regoaranized things under variants section
• curprev 21:5921:59, 9 February 2012‎ Bregalad talk contribs‎ 6,254 bytes +519‎ →‎8kB / 16kB / 32kB / 64kBytes (28pin) ROMs: RROM non standard pinout added !

8 December 2010

• curprev 10:3710:37, 8 December 2010‎ Bregalad talk contribs‎ 5,735 bytes −3,852‎ combined everything into one narrow diagram as Blarg wishes, added info/speculaiton about unused pins

25 November 2010

• curprev 15:1015:10, 25 November 2010‎ Bregalad talk contribs‎ m 9,587 bytes +331‎ →‎128/256/512 KBytes (28/32pin) ROMs: USA NES games with Konami boards apparently uses Nintendo's pinout (looking at the # of pins on bootgod's database).

23 November 2010

• curprev 16:1316:13, 23 November 2010‎ Bregalad talk contribs‎ m 9,256 bytes +12‎ →‎8kB / 16kB / 32kB / 64kBytes (28pin) ROMs: wow how could I leave out such BIG mistakes ? o_o
• curprev 16:1216:12, 23 November 2010‎ Bregalad talk contribs‎ m 9,244 bytes 0‎ CHR - A15 lacking on diagram on the top

22 November 2010

• curprev 23:3223:32, 22 November 2010‎ Blargg talk contribs‎ m 9,244 bytes +1,117‎ →‎8kB / 16kB / 32kB / 64kBytes (28pin) ROMs: pinout comparison
• curprev 03:3903:39, 22 November 2010‎ Tepples talk contribs‎ 8,127 bytes −79‎ →‎128/256/512 KBytes (28/32pin) ROMs: tightened lead
• curprev 00:4800:48, 22 November 2010‎ Tepples talk contribs‎ m 8,206 bytes +35‎ →‎128/256/512 KBytes (28/32pin) ROMs: clarify that this is in fact the JEDEC pinout
• curprev 00:4800:48, 22 November 2010‎ Tepples talk contribs‎ 8,171 bytes −5‎ →‎128/256/512 KBytes (28/32pin) ROMs: inline-block

21 November 2010

• curprev 22:4822:48, 21 November 2010‎ Tepples talk contribs‎ 8,176 bytes +111‎ →‎8kB / 16kB / 32kB / 64kBytes (28pin) ROMs: Use inline-block so that diagrams can drop to the next line on smaller monitors
• curprev 21:0021:00, 21 November 2010‎ Tepples talk contribs‎ m 8,065 bytes 0‎ moved Mask rom pinout to Mask ROM pinout: finishing the merge
• curprev 20:3720:37, 21 November 2010‎ Bregalad talk contribs‎ m 8,065 bytes −1‎ →‎Nintendo MMC5 PRG/CHR ROM pinouts - 128/256/512/1024 kBytes (32pin): quick fix
• curprev 20:3620:36, 21 November 2010‎ Bregalad talk contribs‎ m 8,066 bytes +62‎ →‎128/256/512 KBytes (28/32pin) ROMs: a few fixes
• curprev 20:3320:33, 21 November 2010‎ Bregalad talk contribs‎ 8,004 bytes +1,678‎ Rework on the structure of the page, pinouts are even more grouped together in rows so it's easy to compare them.

16 November 2010

• curprev 12:5112:51, 16 November 2010‎ Bregalad talk contribs‎ m 6,326 bytes +27‎ all known non Nintendo made boards uses the standard pinout

15 November 2010

• curprev 10:0910:09, 15 November 2010‎ Bregalad talk contribs‎ 6,299 bytes +801‎ added MMC5's pin-out

14 November 2010

• curprev 21:0721:07, 14 November 2010‎ Bregalad talk contribs‎ 5,498 bytes +357‎ Dratiscally changed the page, condensed pinouts of multiple sizes in single diagrams, added a bunch of comments.

12 June 2009

• curprev 06:1106:11, 12 June 2009‎ Banshaku talk contribs‎ m 5,141 bytes +5,141‎ Created page with 'PRG ROM - 32KBytes (28pin): (no need to change any pins on EPROM) ---_--- +5V - |01 28| - +5V PRG A12 - |02 27| - PRG A14 PRG A7 ...'