NES 2.0 Mapper 344: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(Other way.)
m (→‎Outer Bank and Mode Register ($6000-$7FFF, write): Showing address bits 0-3 in the mask.)
 
Line 5: Line 5:


==Outer Bank and Mode Register ($6000-$7FFF, write)==
==Outer Bank and Mode Register ($6000-$7FFF, write)==
  Mask: $E000
  Mask: $E00F
   
   
  A~FEDC BA98 7654 3210
  A~FEDC BA98 7654 3210
Line 23: Line 23:
* The common dump of ''快打金卡终极挑战 (Kuàidǎ Jīnkǎ Zhōngjí Tiǎozhàn) 3/6-in-1'' has the 128 KiB PRG-ROM banks mixed-up, correct would be in the order 0, 3, 1, 2.
* The common dump of ''快打金卡终极挑战 (Kuàidǎ Jīnkǎ Zhōngjí Tiǎozhàn) 3/6-in-1'' has the 128 KiB PRG-ROM banks mixed-up, correct would be in the order 0, 3, 1, 2.
* Depending on whether a solder pad is connected, setting the S bit may disable PRG-ROM. The menu sets this bit to select between two different game counts.
* Depending on whether a solder pad is connected, setting the S bit may disable PRG-ROM. The menu sets this bit to select between two different game counts.
==MMC3-compatible registers==
==MMC3-compatible registers==
Mask: $E001
Mask: $E001


See [[MMC3]].
See [[MMC3]].

Latest revision as of 21:01, 1 March 2022

NES 2.0 Mapper 344 denotes the GN-26 MMC3-based multicart circuit board. Its UNIF board name is BMC-GN-26 (with incorrect PRG bank order).

  • 快打金卡终极挑战 (Kuàidǎ Jīnkǎ Zhōngjí Tiǎozhàn) 3/6-in-1

Outer Bank and Mode Register ($6000-$7FFF, write)

Mask: $E00F

A~FEDC BA98 7654 3210
  -------------------
  011. .... .... SMBA
                 ||++- PRG/CHR A18..17
                 ||+-- CHR A17 mode
                 ||     0: CHR A17=MMC3 A17
                 ||     1: CHR A17=$6000.0
                 |+--- Select PRG-ROM mode
                 |      0: MMC3 PRG mode
                 |      1: NROM PRG mode
                 +---- Solder pad test
  • WRAM must be enabled in $A001.7 before writing to this register.
  • The inner PRG bank is restricted to 128 KiB.
  • NROM mode PRG forces MMC3's CPU A13 and A14 inputs to GND and replaces MMC3's PRG A13 output with CPU A13. This means that MMC3 bank register 6 bits 1-3 provide PRG A14..A16 for the entire CPU $8000-$FFFF range.
  • The common dump of 快打金卡终极挑战 (Kuàidǎ Jīnkǎ Zhōngjí Tiǎozhàn) 3/6-in-1 has the 128 KiB PRG-ROM banks mixed-up, correct would be in the order 0, 3, 1, 2.
  • Depending on whether a solder pad is connected, setting the S bit may disable PRG-ROM. The menu sets this bit to select between two different game counts.

MMC3-compatible registers

Mask: $E001

See MMC3.