NES 2.0 Mapper 364

From NESdev Wiki
Revision as of 16:13, 17 December 2023 by NewRisingSun (talk | contribs) (Slight update)
Jump to navigationJump to search

NES 2.0 Mapper 364 is used for an early MMC3-based multicart PCB (JY830832C) from J.Y. Company, preceding the J.Y. Company ASIC. A compatible PCB has the code 9053.

  • 1994 Super HiK 3-in-1 (JY-007)
  • 1996 Super HiK Gold Card (LT-953)

Outer Bank Register ($6000-$7FFF)

Mask: $E000

D~7654 3210
  ---------
  .PSC ....
   ||+------ CHR A18
   |+------- PRG/CHR A17 mode
   |          0: Preserve MMC3's PRG/CHR A17
   |          1: Force PRG/CHR A17 to 0
   +-------- PRG A18

This register is accessible regardless of whether WRAM is enabled in the MMC3 clone's A001 register. It may be possible that there is another bit, unused on the only discovered cartridge using this mapper, that selects the bit value which PRG/CHR A17 is forced to when S=1. Note that unlike many similar MMC3-based multicarts, this register is accessible even when the MMC3's WRAM bit in register $A001 is clear.

MMC3-compatible registers

Mask: $E001

See MMC3.

See also

NES 2.0 Mapper 361 describes a simpler variant with a fixed outer bank size.