NES cartridge dimensions: Difference between revisions
m (Added new section specifically for PCB vs Cartridge.) |
|||
| Line 2: | Line 2: | ||
== NES Cartridge Outline == | == NES Cartridge Outline == | ||
New measurements are needed. | New measurements are needed. | ||
== NES Cartridge PCB Outline == | |||
On the right is a diagram showing the basic outline of an NROM PCB. | |||
[[File:NROMPCBdimensions.jpg|thumb]] | |||
== NES cartridge pin dimensions == | == NES cartridge pin dimensions == | ||
Revision as of 06:29, 30 May 2016
NES Cartridge Outline
New measurements are needed.
NES Cartridge PCB Outline
On the right is a diagram showing the basic outline of an NROM PCB.
NES cartridge pin dimensions
On the right is a diagram showing the pin dimensions and their pitch (spacing). Note: the pitch is 2.50 millimeters (0.0984 inches), not the standard 2.54 millimeters (0.100 inches) that is very common today for dual-inline package chips.
XDraft
XDraft 2D CAD/Drafting Program (This page previously had schematics made in Xdraft on it.)
Label dimensions
An NES Game Pak label measures roughly 55x97 mm, with the top 7 mm of that in the fold-over. But actual printing will need a bit of extra space for the bleed area. Here's a template showing the approximate size of a label for a standard NES cartridge.
acfrazier recommended printing cart labels on Avery 5164, Avery 5264, or Avery 8164 (4x3.33 in) labels.
