Oeka Kids tablet: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(important note - yes, the coordinates ARE scaled "backwards")
mNo edit summary
Line 35: Line 35:
     ++++++++----------- Stylus X, scaled to 0-239
     ++++++++----------- Stylus X, scaled to 0-239


The fact that X and Y are scaled backwards is *not* an error - the games which use this mapper rescale the coordinates by multiplying X by 256/240 and multiplying Y by 240/256.
The fact that X and Y are scaled backwards is ''not'' an error - the games which use this mapper rescale the coordinates by multiplying X by 256/240 and multiplying Y by 240/256.


[[Category:Controllers]]
[[Category:Controllers]]

Revision as of 13:15, 16 July 2016

The Oeka Kids tablet is a Famicom accessory from Bandai that resembles a drawing tablet, and plugs into the expansion port. There are two known games that use this peripheral, using iNES Mapper 096, both of which contain a variety of activities, such as painting, drawing lessons, hiragana lessons, and a variety of minigames such as mazes and sliding puzzles.

Very little information about this accessory is available, and only basic reverse engineering has been performed so far. As such, this information may be incorrect, but it seems to be acceptable for the two commercial games that use it.

Input ($4016 write)

7  bit  0
---- ----
xxxx xxAS
       ||
       |+- Strobe (0 = Latch, 1 = Read mode)
       +-- Advance to next bit

Bits can be read only while S is 1. It advances to the next bit when S is 1 and A transitions from 0 to 1.

Output ($4017 read)

7  bit  0
---- ----
xxxx DSxx
     ||
     |+-- 0 if strobe is 1, 1 otherwise.
     +--- (Inverted) Serial data if strobe is 1, 0 if strobe is 0.

The serial data is returned most significant bit first, and inverted (including the touch and click bits).

$4017.2
   ^
   |  <-- <-- <-- <--
   XXXXXXXXYYYYYYYYBA
   ||||||||||||||||||
   |||||||||||||||||+- Click
   ||||||||||||||||+-- Stylus is touching tablet
   ||||||||++++++++--- Stylus Y, scaled to 0-255
   ++++++++----------- Stylus X, scaled to 0-239

The fact that X and Y are scaled backwards is not an error - the games which use this mapper rescale the coordinates by multiplying X by 256/240 and multiplying Y by 240/256.