TXC 05-00002-010 pinout: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (add cat)
(mention how mapper 173 both supports 64 KiB CHR but never actually had any)
 
(5 intermediate revisions by 2 users not shown)
Line 3: Line 3:


                 .--\/--.
                 .--\/--.
           Qc <- |01  24| -> Qabc_carry
           Q2 <- |01  24| -> Q3
           Qb <- |02  23| -> Qf
           Q1 <- |02  23| -> Q4
           Qa <- |03  22| -> Invert?
           Q0 <- |03  22| -> o3
          GND ?? |04  21| <- CPU A13 (rn)
          i1 -> |04  21| <- CPU A13 (rn)
           5V ?? |05  20| <- CPU A14 (rn)
           i0 -> |05  20| <- CPU A14 (rn)
          Df <> |06  19| ?? GND
          io2 <> |06  19| -- GND
           5V ?? |07  18| <- CPU R/W (n)
           5V -- |07  18| <- CPU R/W (n)
           Dg <> |08  17| <- /ROMSEL (rn)
           D5 <> |08  17| <- /ROMSEL (rn)
           Dh <> |09  16| <- M2 (n)
           D4 <> |09  16| <- M2 (n)
           Dc <> |10  15| <- CPU A8 (rn)
           D2 <> |10  15| <- CPU A8 (rn)
           Db <> |11  14| <- CPU A1 (rn)
           D1 <> |11  14| <- CPU A1 (rn)
           Da <> |12  13| <- CPU A0 (rn)
           D0 <> |12  13| <- CPU A0 (rn)
                 '------'
                 '------'


On mapper 36, this ASIC is connected as:
There is a lot more functionality here than was used in any of the three mappers that used it.
 
Mask: $E103
  Write $4103: [.... ...C] - Set/Clear Increment Mode
  Write $4101: [.... ...V] - Set/Clear Invert Mode. Also affects io2 and o3.
                              When clear, io2 relays i0. When set, io2 relays i1.
                              o3 is io2 OR D5 continuously.
                              If something externally overpowers io2, then:
                              When V is clear, o3 is i0 OR D5.
                              When V is set, o3 is io2 OR D5.
  Write $4102: [..RR .PPP] - D[5,4] -> R[5,4]. D[2,1,0] -> P[2,1,0]
                              P3 XOR V -> P3.
  Write $4100: [.... ....] - If Increment Mode is set, R[3,2,1,0] += 1
                              Otherwise, P[3,2,1,0] XOR V -> R[3,2,1,0]
Mask: $E100
  Read $4100:  [..RR .RRR] - R[5,4] XOR V -> D[5,4]. R[2,1,0] -> D[2,1,0]
Mask: $8000
  Write $8000: [.... ....] - R[3,2,1,0] -> Q[3,2,1,0]. R4 XOR V -> Q4.
 
On [[iNES Mapper 036|mapper 36]], this ASIC is connected as:
                 .--\/--.
                 .--\/--.
           NC <- |01  24| -> NC
           NC <- |01  24| -> NC
   (r) PRG A16 <- |02  23| -> NC
   (r) PRG A16 <- |02  23| -> NC
   (r) PRG A15 <- |03  22| -> NC
   (r) PRG A15 <- |03  22| -> NC
           GND ?? |04  21| <- CPU A13 (rn)
           GND -> |04  21| <- CPU A13 (rn)
           5V ?? |05  20| <- CPU A14 (rn)
           5V -> |05  20| <- CPU A14 (rn)
           NC <> |06  19| ?? GND
           NC <> |06  19| -- GND
           5V ?? |07  18| <- CPU R/W (n)
           5V -- |07  18| <- CPU R/W (n)
           NC <> |08  17| <- /ROMSEL (rn)
           NC <> |08  17| <- /ROMSEL (rn)
           NC <> |09  16| <- M2 (n)
           NC <> |09  16| <- M2 (n)
Line 33: Line 55:
                 '------'
                 '------'


On mapper 132:
On [[iNES Mapper 132|mapper 132]]:
                .--\/--.
   (r) PRG A15 <- |01  24| -> NC
   (r) PRG A15 <- |01  24| -> NC
   (r) CHR A14 <- |02  23| -> NC
   (r) CHR A14 <- |02  23| -> NC
Line 39: Line 62:
           GND -> |04  21| <- CPU A13 (fr)
           GND -> |04  21| <- CPU A13 (fr)
           5V -> |05  20| <- CPU A14 (fr)
           5V -> |05  20| <- CPU A14 (fr)
           NC <> |06  19| ?? GND
           NC <> |06  19| -- GND
           5V -> |07  18| <- CPU R/W (f)
           5V -- |07  18| <- CPU R/W (f)
           GND -> |08  17| <- /ROMSEL (fr)
           GND <> |08  17| <- /ROMSEL (fr)
   (fr) CPU D3 <> |09  16| <- M2 (f)
   (fr) CPU D3 <> |09  16| <- M2 (f)
   (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
   (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
Line 48: Line 71:
                 '------'
                 '------'


On mapper 173, labeled "ITC20V8-10LP"
On [[iNES Mapper 173|mapper 173]], labeled "ITC20V8-10LP"
                 .--\/--.
                 .--\/--.
           NC <- |01  24| -> NC
           NC <- |01  24| -> NC
  (r) CHR A15 <- |02  23| -> NC
*(r) CHR A15 <- |02  23| -> NC
   (r) CHR A13 <- |03  22| -> CHR A14
   (r) CHR A13 <- |03  22| -> CHR A14
          NC ?? |04  21| <- CPU A13 (fr)
          GND -> |04  21| <- CPU A13 (fr)
           5V ?? |05  20| <- CPU A14 (fr)
           5V -> |05  20| <- CPU A14 (fr)
           NC <> |06  19| ?? GND
           NC <> |06  19| <- GND
           5V ?? |07  18| <- CPU R/W (f)
           5V -- |07  18| <- CPU R/W (f)
           GND -> |08  17| <- /ROMSEL (fr)
           GND <> |08  17| <- /ROMSEL (fr)
   (fr) CPU D3 <> |09  16| <- M2 (f)
   (fr) CPU D3 <> |09  16| <- M2 (f)
   (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
   (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
Line 63: Line 86:
   (fr) CPU D0 <> |12  13| <- CPU A0 (fr)
   (fr) CPU D0 <> |12  13| <- CPU A0 (fr)
                 '------'
                 '------'
<nowiki>*</nowiki> TXC pin 2 was routed to CHR ROM pin 1 on a 28-pin package. On a UVEPROM, this is A15. However, no games were ever released using more than 32 KiB of CHR.

Latest revision as of 20:53, 5 September 2018

05-00002-010: 24-pin 0.3" DIP. (Mappers 036, 132, and 173)

                .--\/--.
          Q2 <- |01  24| -> Q3
          Q1 <- |02  23| -> Q4
          Q0 <- |03  22| -> o3
          i1 -> |04  21| <- CPU A13 (rn)
          i0 -> |05  20| <- CPU A14 (rn)
         io2 <> |06  19| -- GND
          5V -- |07  18| <- CPU R/W (n)
          D5 <> |08  17| <- /ROMSEL (rn)
          D4 <> |09  16| <- M2 (n)
          D2 <> |10  15| <- CPU A8 (rn)
          D1 <> |11  14| <- CPU A1 (rn)
          D0 <> |12  13| <- CPU A0 (rn)
                '------'

There is a lot more functionality here than was used in any of the three mappers that used it.

Mask: $E103
  Write $4103: [.... ...C] - Set/Clear Increment Mode
  Write $4101: [.... ...V] - Set/Clear Invert Mode. Also affects io2 and o3.

                             When clear, io2 relays i0. When set, io2 relays i1.
                             o3 is io2 OR D5 continuously.

                             If something externally overpowers io2, then:
                             When V is clear, o3 is i0 OR D5.
                             When V is set, o3 is io2 OR D5.

  Write $4102: [..RR .PPP] - D[5,4] -> R[5,4]. D[2,1,0] -> P[2,1,0]
                             P3 XOR V -> P3.
  Write $4100: [.... ....] - If Increment Mode is set, R[3,2,1,0] += 1
                             Otherwise, P[3,2,1,0] XOR V -> R[3,2,1,0]
Mask: $E100
  Read $4100:  [..RR .RRR] - R[5,4] XOR V -> D[5,4]. R[2,1,0] -> D[2,1,0]
Mask: $8000
  Write $8000: [.... ....] - R[3,2,1,0] -> Q[3,2,1,0]. R4 XOR V -> Q4.

On mapper 36, this ASIC is connected as:

                .--\/--.
          NC <- |01  24| -> NC
 (r) PRG A16 <- |02  23| -> NC
 (r) PRG A15 <- |03  22| -> NC
         GND -> |04  21| <- CPU A13 (rn)
          5V -> |05  20| <- CPU A14 (rn)
          NC <> |06  19| -- GND
          5V -- |07  18| <- CPU R/W (n)
          NC <> |08  17| <- /ROMSEL (rn)
          NC <> |09  16| <- M2 (n)
          NC <> |10  15| <- CPU A8 (rn)
 (rn) CPU D5 <> |11  14| <- CPU A1 (rn)
 (rn) CPU D4 <> |12  13| <- CPU A0 (rn)
                '------'

On mapper 132:

                .--\/--.
 (r) PRG A15 <- |01  24| -> NC
 (r) CHR A14 <- |02  23| -> NC
 (r) CHR A13 <- |03  22| -> NC
         GND -> |04  21| <- CPU A13 (fr)
          5V -> |05  20| <- CPU A14 (fr)
          NC <> |06  19| -- GND
          5V -- |07  18| <- CPU R/W (f)
         GND <> |08  17| <- /ROMSEL (fr)
 (fr) CPU D3 <> |09  16| <- M2 (f)
 (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
 (fr) CPU D1 <> |11  14| <- CPU A1 (fr)
 (fr) CPU D0 <> |12  13| <- CPU A0 (fr)
                '------'

On mapper 173, labeled "ITC20V8-10LP"

                .--\/--.
          NC <- |01  24| -> NC
*(r) CHR A15 <- |02  23| -> NC
 (r) CHR A13 <- |03  22| -> CHR A14
         GND -> |04  21| <- CPU A13 (fr)
          5V -> |05  20| <- CPU A14 (fr)
          NC <> |06  19| <- GND
          5V -- |07  18| <- CPU R/W (f)
         GND <> |08  17| <- /ROMSEL (fr)
 (fr) CPU D3 <> |09  16| <- M2 (f)
 (fr) CPU D2 <> |10  15| <- CPU A8 (fr)
 (fr) CPU D1 <> |11  14| <- CPU A1 (fr)
 (fr) CPU D0 <> |12  13| <- CPU A0 (fr)
                '------'

* TXC pin 2 was routed to CHR ROM pin 1 on a 28-pin package. On a UVEPROM, this is A15. However, no games were ever released using more than 32 KiB of CHR.