Search results

...T:554}}[[Category:FDS conversion mappers]][[Category:Mappers triggering on reads]] ...tlevania''. Bankswitching is unusual in being triggered entirely through ''reads'' from "magic" addresses. The board mounts 128 KiB PRG-ROM, 128 KiB CHR-ROM

[[Category:Nintendo licensed mappers]] [[Category:Mappers triggering on reads]] ...intendo MMC4''' is an [[:Category:ASIC mappers|ASIC]] [[MMC|mapper]], used on the [[FxROM]] board set. The [[iNES]] format assigns '''mapper 10''' to the

}}[[Category:Nintendo licensed mappers]] ...intendo MMC2''' is an [[:Category:ASIC mappers|ASIC]] [[MMC|mapper]], used on the '''PNROM''' and '''PEEOROM''' Nintendo Game Pak boards for ''Mike Tyson

...s]][[Category:Mappers with scanline IRQs]][[Category:Mappers triggering on reads]] The PAL maintains four signals for bankswitching and responds both to reads and writes:

{{DEFAULTSORT:355}}[[Category:Mappers triggering on reads]] * ''Block Force'' (original version, with credits and contact information on the options screen)

...artDB]][[Category:Discrete logic mappers]][[Category:Mappers triggering on reads]] ...trange for the NES: Registers lie at $FF80-$FFF7 but bankswitching happens on the ''value that was read''. Bus conflicts are thus avoided by storing the

...sequence. There are 2 128kByte banks, and the low bank is default at power-on. Writing 1 to $40B0.0 selects the high bank. Reading from $40B0 resets to t 75 / -> Exp P3-6 ($40A3.0) Turn on Motor