INES Mapper 113: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(infobox)
(Add PCB name)
 
Line 10: Line 10:
|mirroring=H or V, controlled by mapper
|mirroring=H or V, controlled by mapper
}}
}}
[[iNES Mapper 113]] is used to designate a multicart made for a bunch of [[NINA-003-006|NINA-03/06]] games. The board name of these larger multicarts is unknown, as none are in NesCartDB.
[[iNES Mapper 113]] denotes the HES '''NTD-8''' circuit board, used to create multicarts made for a bunch of [[NINA-003-006|NINA-03/06]] games.


Example Games:
Example Games:

Latest revision as of 11:51, 3 March 2023


Mapper 113
Company unknown
Boards unknown
PRG ROM capacity 256K
PRG ROM window 32K
PRG RAM capacity None
CHR capacity 128K
CHR window 8k
Nametable mirroring H or V, controlled by mapper
Bus conflicts No
IRQ No
Audio No
iNES mappers 113

iNES Mapper 113 denotes the HES NTD-8 circuit board, used to create multicarts made for a bunch of NINA-03/06 games.

Example Games:

  • HES 6-in-1
  • Mind Blower Pak
  • Total Funpak

Banks

  • CPU $8000-$FFFF: 32 KB switchable PRG ROM bank (max 256 KB)
  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank (max 128 KB)

Registers

Control Register

This register is located at addresses:

F        bit      0
---- ---- ---- ----
010x xxx1 xxxx xxxx

That is, $4100-$41FF, $4300-$43FF, $45xx, $47xx, ..., $5Dxx, and $5Fxx.

7  bit  0
---- ----
MCPP PCCC
|||| ||||
|+||-|+++-- Select 8 KB CHR ROM bank for PPU $0000-$1FFF
| ++-+----- Select 32 KB PRG ROM bank for CPU $8000-$FFFF
+---------- Mirroring control (0 = Horizontal, 1 = Vertical)

Note the high bit of the CHR select is shifted away from the others.

Variants

This mapper extends the NINA-03/06 with an extra 4 bits of control register. The low 4 bits written behave the same, but the high 4 bits add mirroring control, 1 extra bit of CHR select, and 2 extra bits of PRG select.

References