FxROM: Difference between revisions
From NESdev Wiki
Jump to navigationJump to search
Rainwarrior (talk | contribs) |
m (→Solder Pad config: typo) |
||
| Line 29: | Line 29: | ||
* PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present. | * PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present. | ||
On the FKROM board, battery backup appears to be | On the FKROM board, battery backup appears to be compulsory unless there is a hidden solder pad below the MM1026 chip. | ||
== Hardware == | == Hardware == | ||
Latest revision as of 06:23, 7 April 2021
The generic designation FxROM refers to cartridge boards made by Nintendo that use the Nintendo MMC4 mapper.
Board Types
The following FxROM boards are known to exist:
| Board | PRG ROM | PRG RAM | CHR |
|---|---|---|---|
| FJROM | 128 / 256 KB | 8 KB | 16 / 32 / 64 KB ROM |
| FKROM | 128 / 256 KB | 8 KB | 128 KB ROM |
Overview
- PRG ROM size: up to 256 KB
- PRG ROM bank size: 16 KB
- PRG RAM: 8 KB plus optional battery
- CHR capacity: up to 128 KB ROM
- CHR bank size: 4 KB
- Nametable mirroring: Controlled by mapper
- Subject to bus conflicts: No
Solder Pad config
Battery backup
- PRG RAM with data retention : 'SL' disconnected, D1, D2, R1, R2, R3 present.
- PRG RAM without data retention : 'SL' connected, D1, D2, R1, R2, R3 not present.
On the FKROM board, battery backup appears to be compulsory unless there is a hidden solder pad below the MM1026 chip.
Hardware
The FKROM board uses a Mitsumi MM1026 chip dedicated to safe battery backup. It's the only Nintendo board to use a specific chip dedicated to safe battery backup.
