INES Mapper 031: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
No edit summary
(→‎Emulator support: puNES also supports it)
Line 11: Line 11:


== Emulator support ==
== Emulator support ==
Supported in BizHawk as of r6492.
*BizHawk r6492.
Supported in MESS as of r30137.
*MESS r30137.
*puNES 0.84


[[category:Mappers using $4020-$5FFF]] [[category:iNES Mappers]]
[[category:Mappers using $4020-$5FFF]] [[category:iNES Mappers]]

Revision as of 04:03, 4 May 2014

iNES Mapper 031 represents 2A03 Puritans, a cartridge implementing a variant of the NSF mapper.

$5FF8 switches $8000-$8FFF, $5FF9 switches $9000-$9FFF, ..., $5FFF switches $F000-$FFFF, in 4096 bytes out of a PRG ROM up to 1 MiB. At power-on, $F000 is the last bank ($5FFF contains $FF), and nothing changes at reset. These registers are mirrored throughout $5000-$5FFF with no bus conflicts.

As with BNROM and UxROM, there is no mirroring, CHR bank, or IRQ control; this mapper is intended for use with an 8 KiB CHR RAM or ROM and hardwired H or V mirroring.

References

Emulator support

  • BizHawk r6492.
  • MESS r30137.
  • puNES 0.84