INES Mapper 031: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(famicompo pico and test roms)
(forgot another release: RNDM (ROM is not publicly released for this one, though))
Line 10: Line 10:
* ''2A03 Puritans'' ([http://rainwarrior.ca/projects/nes/2a03puritans.html ROM])
* ''2A03 Puritans'' ([http://rainwarrior.ca/projects/nes/2a03puritans.html ROM])
* ''Famicompo Pico 2014'' ([http://rainwarrior.ca/projects/nes/pico.html ROM])
* ''Famicompo Pico 2014'' ([http://rainwarrior.ca/projects/nes/pico.html ROM])
* ''RNDM'' ([http://megaranmusic.com/album/rndm info])
* ''Test ROMs'' ([http://forums.nesdev.org/viewtopic.php?f=3&t=13120 forum post])
* ''Test ROMs'' ([http://forums.nesdev.org/viewtopic.php?f=3&t=13120 forum post])



Revision as of 19:45, 12 November 2015

iNES Mapper 031 represents a mapper created to facilitate cartridge compilations of NSF music. It implements a common subset of the features used by NSFs.

PRG-ROM is bankswitched in 8 x 4 kB banks from $8000-FFFF. These are controlled by registers at $5FF8-$5FFF like the NSF mapper. The high bank at $F000-FFFF is initialized to the last bank at power-on.

There is no CHR banking, so it is recommended to use 8 kB CHR-RAM with this mapper.

As with BNROM and UxROM, there is no mirroring, CHR bank, or IRQ control; this mapper has hardwired H or V mirroring.

Examples:

Overview

  • PRG ROM size: Up to 1024 kB
  • PRG ROM bank size: 4 kB
  • PRG RAM: None
  • CHR capacity: 8 kB RAM/ROM
  • CHR bank size: Not bankswitched
  • Nametable mirroring: horizontal or vertical, hard wired.
  • Subject to bus conflicts: No

Registers

PRG bank select $5000-$5FFF

address              data
15      bit       0  7  bit  0
-------------------  ---------
0101 .... .... .AAA  PPPP PPPP
                |||  |||| ||||
                |||  ++++-++++- Select 4 kB PRG ROM bank at slot specified by write address.
                +++------------ Specify 4 kB bank slot at: $8000 + (AAA * $1000)

The canonical write position for these registers is $5FF8-$5FFF, as used in NSFs.

At power on, the register at $5FFF is set to $FF. Startup code should be placed in the last bank. There is no change to this register on reset.

References

Emulator support

  • BizHawk r6492
  • MESS r30137
  • puNES 0.84
  • FCEUX r3094
  • Nintendulator 0.975