INES Mapper 094: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (It has bus conflicts.)
m (iNES category sorting)
Line 7: Line 7:
* PRG ROM bank size: 16 KB
* PRG ROM bank size: 16 KB
* PRG RAM: None
* PRG RAM: None
* CHR capacity: 8 KB RAM [[Category:Mappers with CHR RAM]]
* CHR capacity: 8 KB RAM [[Category:Mappers with CHR RAM|094]]
* CHR bank size: Not bankswitched
* CHR bank size: Not bankswitched
* Nametable [[mirroring]]: Solder pads select vertical or horizontal mirroring
* Nametable [[mirroring]]: Solder pads select vertical or horizontal mirroring

Revision as of 08:37, 28 September 2012


INES Mapper 094 is used to represent the board HVC-UN1ROM. Senjou no Ookami (Japanese version of Commando) is the only game known to utilize this mapper. It is very similar to UxROM, but the register is shifted by two bits.

Overview

  • PRG ROM size: 128 KB
  • PRG ROM bank size: 16 KB
  • PRG RAM: None
  • CHR capacity: 8 KB RAM
  • CHR bank size: Not bankswitched
  • Nametable mirroring: Solder pads select vertical or horizontal mirroring
  • Subject to bus conflicts: Yes

Banks

  • CPU $8000-$BFFF: 16 KB switchable PRG ROM bank
  • CPU $C000-$FFFF: 16 KB PRG ROM bank, fixed to the last bank

Registers

Bank select ($8000-$FFFF)

7  bit  0
---- ----
xxxP PPxx
   | ||
   +-++--- Select 16 KB PRG ROM bank for CPU $8000-$BFFF


 Here are Disch's original notes:
 ========================
 =  Mapper 094          =
 ========================
 
 Example Games:
 --------------------------
 Senjou no Ookami
 
 
 Registers: (*** BUS CONFLICTS ***)
 --------------------------
   $8000-FFFF:  [...P PP..]   PRG Reg  (16k @ $8000)
 
 
 PRG Setup:
 --------------------------
 
       $8000   $A000   $C000   $E000  
     +---------------+---------------+
     |     $8000     |     { -1}     |
     +---------------+---------------+