INES Mapper 185: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(→‎Bank select ($8000-$FFFF): Now that this isn't Disch's notes, let's edit for style.)
(→‎Bank select ($8000-$FFFF): link to CNROM page to explain the upper two bits)
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{DEFAULTSORT:185}}[[Category:iNES Mappers]][[Category:in NesCartDB]][[Category:Discrete logic mappers]][[Category:Nintendo licensed mappers]][[Category:NES 2.0 mappers with submappers]]
{{DEFAULTSORT:185}}[[Category:iNES Mappers]][[Category:in NesCartDB]][[Category:Discrete logic mappers]][[Category:Nintendo licensed mappers]][[Category:NES 2.0 mappers with submappers]]
'''iNES Mapper 185''' is used for games that use the [[CNROM]] board with weak copy protection measures.
'''iNES Mapper 185''' is used for games that use the [[CNROM]] board with weak copy protection measures.
Example Games:
* ''Spy Vs. Spy (J)''
* ''Mighty Bomb Jack (J)''


==Overview==
==Overview==
Line 25: Line 21:
   ++---++- Used for CHR copy protection.
   ++---++- Used for CHR copy protection.


These games only have 8k of CHR, and they attempt to disable CHR by writing
These games only have 8k of CHR, and they attempt to disable CHR by writing a specific value to the CHR Reg, then VERIFY that garbage is read back, then they swap back to the actual CHR.  If they don't get the expected garbage, they lock up.
a specific value to the CHR Reg, then VERIFY that garbage is read back, then they swap back to the
actual CHR.  If they don't get the expected garbage, they lock up.


Each game has their own value that enables/disables CHR. However, a simple heuristic obviates the need to detect each game individually:
Each game has their own value that enables/disables CHR. The correct value may be specified using the [[NES_2.0_submappers#185:_CNROM_used_to_selectively_disable_CHR-ROM|submapper field in the NES 2.0 header]]. If an iNES image's header does not specify a submapper, then a heuristic must be used to allow these games to run. Two heuristics are commonly used by emulators:
* If C AND $0F is nonzero, and if C does not equal $13, then CHR is enabled, otherwise CHR is disabled. This works with all games except for ''[//nescartdb.com/profile/view/2332 Seicross (v2)]''.
* Return garbage for the first two reads from $2007 after a reset. This works with all games, as they all test for the bad value first, and the correct value (if at all) second.


* if C AND $0F is nonzero, and if C does not equal $13: CHR is enabled
When CHR is disabled, the pattern tables are [[open bus]]. Theoretically, this should return the LSB of the address read, but real-world behavior varies.
* otherwise CHR is disabled


When CHR is disabled, the pattern tables are open bus. Theoretically, this should
This table has been assembled from nocash and the sources of MESS, Nestopia, and FCEUX; the specific tests were traced from dumps in GoodNES.
return the LSB of the address read, but real-world behavior may vary.
{| class="datatable sortable"
 
! || bank || PPU addr || test || bank || PPU addr || test
 
|-
This table has been assembled from nocash and the sources of MESS, Nestopia, and FCEUX.
! Game !! colspan=3|Incorrect bank !! colspan=3|Must work <!-- specific test -->
{| class="datatable"
|-
! !! colspan=2|if this value is written
| [//nescartdb.com/profile/view/1262 Bird Week] || $F0 || $1FF0 || ≠ $0C || $0F || $1FF0 || = $0C
|-
| [//nescartdb.com/profile/view/1264 B-Wings] || $00 || $0000 || ≠ $3C || $33 || $0000 || = $3C
|-
|-
! Game !! Must work !! Mustn't work <!-- possible submapper number -->
| [//nescartdb.com/profile/view/1261 Mighty Bomb Jack (J)] || $00 || $0000 || ≠ $00 || $11 || colspan=2|untested
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=1262 Bird Week] || 0x0F || 0xF0 <!-- 3 -->
| Mighty Bomb Jack [//nescartdb.com/profile/view/202 (U)], [//nescartdb.com/profile/view/2143 (E)] || $00 || $0001 || ≠ $3C || $11 || colspan=2|untested
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=1264 B-Wings] || 0x33 || 0x00 <!-- F -->
| Sansuu 1 Nen || $20 || $000C || ≠ $BC || $22 || $000C || = $BC
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=1261 Mighty Bomb Jack] || 0x11 || 0x00 <!-- 5 -->
| [//nescartdb.com/profile/view/1263 Sansuu 2 Nen] || $20 || $0003 || ≠ $42 || $22 || $0003 || = $42
|-
|-
| Sansuu 1 Nen, [http://bootgod.dyndns.org:7777/profile.php?id=1263 Sansuu 2 Nen], and [http://bootgod.dyndns.org:7777/profile.php?id=4061 Othello] || 0x22 || 0x20 <!-- A -->
| [//nescartdb.com/profile/view/4061 Othello] || $20 || $0006 || ≠ $3F || $22 || $0006 || = $3F
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=3791 Sansuu 3 Nen] || 0xFF || 0x00 <!-- F -->
| [//nescartdb.com/profile/view/3791 Sansuu 3 Nen] || $00 || $0006 || ≠ $34 || $2A || $0006 || = $34
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=3592 Spy vs Spy] || 0x21 || 0x13 <!-- 9 -->
| [//nescartdb.com/profile/view/3592 Spy vs Spy] || $13 || $1F20 || ≠ $55 || $21 || colspan=2|untested
|-
|-
| [http://bootgod.dyndns.org:7777/profile.php?id=2332 Seicross (v2)] || 0x20 || 0x21 <!-- 8 -->
| [//nescartdb.com/profile/view/2332 Seicross (v2)] || $21 || $0700…$0707 || ≠ $20,$60,$70,$70,$70,$40,$08,$38 || $20 || colspan=2|untested
|}
|}


''Seicross (v2)'' does not work with the above heuristic.
It is true, but trivia, that the upper two bits of the latch are actually connected to diodes on the PCB. These are described [[CNROM#Solder_Pad_Config|here]].
However, the only difference between v1 and v2 of this game is the addition of this copy protection.
Additionally, [[NES 2.0 submappers]] would handle it.


==References==
==References==
* [http://www.romhacking.net/documents/362/ Disch's Mapper Notes]
* [http://www.romhacking.net/documents/362/ Disch's Mapper Notes]

Latest revision as of 23:57, 1 November 2023

iNES Mapper 185 is used for games that use the CNROM board with weak copy protection measures.

Overview

  • PRG ROM size: 16 KiB or 32 KiB
  • PRG ROM bank size: Not bankswitched
  • PRG RAM: None
  • CHR capacity: 8 KiB ROM (copy protected)
  • Nametable mirroring: Solder pads select vertical or horizontal mirroring
  • Subject to bus conflicts: Yes

Banks

  • PPU $0000-$1FFF: 8 KB switchable CHR ROM bank

Registers

Bank select ($8000-$FFFF)

7  bit  0
---- ----
..CC ..CC
  ||   ||
  ++---++- Used for CHR copy protection.

These games only have 8k of CHR, and they attempt to disable CHR by writing a specific value to the CHR Reg, then VERIFY that garbage is read back, then they swap back to the actual CHR. If they don't get the expected garbage, they lock up.

Each game has their own value that enables/disables CHR. The correct value may be specified using the submapper field in the NES 2.0 header. If an iNES image's header does not specify a submapper, then a heuristic must be used to allow these games to run. Two heuristics are commonly used by emulators:

  • If C AND $0F is nonzero, and if C does not equal $13, then CHR is enabled, otherwise CHR is disabled. This works with all games except for Seicross (v2).
  • Return garbage for the first two reads from $2007 after a reset. This works with all games, as they all test for the bad value first, and the correct value (if at all) second.

When CHR is disabled, the pattern tables are open bus. Theoretically, this should return the LSB of the address read, but real-world behavior varies.

This table has been assembled from nocash and the sources of MESS, Nestopia, and FCEUX; the specific tests were traced from dumps in GoodNES.

bank PPU addr test bank PPU addr test
Game Incorrect bank Must work
Bird Week $F0 $1FF0 ≠ $0C $0F $1FF0 = $0C
B-Wings $00 $0000 ≠ $3C $33 $0000 = $3C
Mighty Bomb Jack (J) $00 $0000 ≠ $00 $11 untested
Mighty Bomb Jack (U), (E) $00 $0001 ≠ $3C $11 untested
Sansuu 1 Nen $20 $000C ≠ $BC $22 $000C = $BC
Sansuu 2 Nen $20 $0003 ≠ $42 $22 $0003 = $42
Othello $20 $0006 ≠ $3F $22 $0006 = $3F
Sansuu 3 Nen $00 $0006 ≠ $34 $2A $0006 = $34
Spy vs Spy $13 $1F20 ≠ $55 $21 untested
Seicross (v2) $21 $0700…$0707 ≠ $20,$60,$70,$70,$70,$40,$08,$38 $20 untested

It is true, but trivia, that the upper two bits of the latch are actually connected to diodes on the PCB. These are described here.

References