Input devices

From NESdev Wiki
Revision as of 05:45, 12 June 2009 by Banshaku (talk | contribs) (Created page with 'The NES and Famicom have a set of I/O ports used for controllers and other peripherals, consisting of the following: * One output port, 3 bits wide, accessible by writing the bot...')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigationJump to search

The NES and Famicom have a set of I/O ports used for controllers and other peripherals, consisting of the following:

  • One output port, 3 bits wide, accessible by writing the bottom 3 bits of $4016.
  • Two input ports, each 5 bits wide, accessible by reading the bottom 5 bits of $4016 and $4017.

The NES has two general-purpose controller ports on the front of the console, as well as a (rarely used) 48-pin expansion port underneath.

The Famicom's standard controllers are hardwired to the front of the unit, and a special 15-pin expansion port is commonly used for third-party controllers. The AV Famicom, however, features detachable controllers using the same ports as the NES.


Programmer's reference

Hardware