PPU registers

From NESdev Wiki
Revision as of 09:53, 20 April 2009 by Banshaku (talk | contribs)
Jump to navigationJump to search

The PPU exposes only eight memory-mapped registers to the CPU. These nominally sit at $2000 through $2007 in the CPU's address space, but because they're incompletely decoded, they're mirrored in every 8 bytes from $2008 through $3FFF, so a write to $3456 is the same as a write to $2006.

Note: The next paragraph explain details that should be more in the getting started reference?

Immediately after powerup, the PPU must wait at least one full frame before it is stable enough to operate normally. The first thing that should be done on startup is to write a zero byte to registers PPUCTRL and PPUMASK (to disable rendering and NMIs) and then wait for bit 7 of PPUSTATUS to be set twice. Some programs will wait for $2002 bit 7 to be set, initialize hardware other than the PPU (such as zeroing CPU RAM), and then wait for $2002 bit 7 to be set again.


PPU REGISTER CONTROLLER

PPU REGISTER MASK

PPU REGISTER STATUS

PPU REGISTER OAM ADDRESS

PPU REGISTER OAM DATA

PPU REGISTER SCROLL

PPU REGISTER ADDRESS

PPU REGISTER DATA