Talk:Make sram: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
(get the rules on the wiki for when I decide to make the changes)
 
m (parodius is out of business)
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
== Super NES support ==
== Super NES support ==
Blargg and others [http://nesdev.parodius.com/bbs/viewtopic.php?p=59070#59070 requested] adding support for Super NES games to make_sram.py.
Blargg and others [http://forums.nesdev.org/viewtopic.php?p=59070#p59070 requested] adding support for Super NES games to make_sram.py.
In order to determine when to create a .sav or .srm file, follow these rules:
In order to determine when to create a .sav or .srm file, follow these rules:


* filename.lower().endswith(('.sfc', '.smc', '.swc', '.fig'))
* filename.lower().endswith(('.sfc', '.smc', '.swc', '.fig'))
* ROM image size is a multiple of 32768 bytes. If the size is 512 bytes more than this, a copier header is present, and the ROM image proper starts at $200 in the file. Presence of a copier header is not correlated with the file name suffix.
* ROM image size is a multiple of 32768 bytes. If the size is 512 bytes more than this, a copier header is present, and the ROM image proper starts at $200 in the file. Presence of a copier header is not correlated with the file name suffix.
* The internal header is 32 bytes at $7FC0 (plus copier header) for LoROM or $FFC0 (plus copier header) for LoROM.
* The internal header is 32 bytes at $7FC0 (plus copier header) for LoROM or $FFC0 (plus copier header) for HiROM.
* To make sure the header is a valid Super NES ROM image, at least two out of three should match:
* To make sure the header is a valid Super NES ROM image, at least two out of three should match:
** internal_header[$15] is $20/$30 for LoROM or $21/$31 for HiROM.
** internal_header[$15] is $20/$30 for LoROM or $21/$31 for HiROM.
** TV system is internal_header[$19] and should be less than $10.
** TV system is internal_header[$19] and should be less than $10.
** internal_header[$1e] = internal_header[$1c] EOR $FF, and internal_header[$1f] = internal_header[$1d] EOR $FF.
** internal_header[$1e] = internal_header[$1c] EOR $FF, and internal_header[$1f] = internal_header[$1d] EOR $FF.
** The header contains a checksum of the entire ROM (subject to mirroring if the ROM is not a power of 2 bytes in size). But ROM hacks often fail this checksum, and ROM hacks are part of PowerPak's reason for existence, so just ignore it.
** The header contains a checksum of the entire ROM (subject to mirroring if the ROM is not a power of 2 bytes in size). But ROM hacks often fail this checksum especially when stacked, and ROM hacks are part of PowerPak's reason for existence, so just ignore it.
* internal_header[$16] tells what components are on the board. Value $02 indicates a battery-backed PRG RAM and no coprocessor.
* internal_header[$16] tells what components are on the board. Value $02 indicates a battery-backed PRG RAM and no coprocessor.
* Size of PRG RAM is 1024 << internal_header[$18] bytes; this byte must be in range $01 through $05.
* Size of PRG RAM is 1024 << internal_header[$18] bytes; this byte must be in range $01 through $05.
--[[User:Tepples|Tepples]] 14:37, 27 March 2010 (UTC)
--[[User:Tepples|Tepples]] 14:37, 27 March 2010 (UTC)

Latest revision as of 12:30, 19 December 2012

Super NES support

Blargg and others requested adding support for Super NES games to make_sram.py. In order to determine when to create a .sav or .srm file, follow these rules:

  • filename.lower().endswith(('.sfc', '.smc', '.swc', '.fig'))
  • ROM image size is a multiple of 32768 bytes. If the size is 512 bytes more than this, a copier header is present, and the ROM image proper starts at $200 in the file. Presence of a copier header is not correlated with the file name suffix.
  • The internal header is 32 bytes at $7FC0 (plus copier header) for LoROM or $FFC0 (plus copier header) for HiROM.
  • To make sure the header is a valid Super NES ROM image, at least two out of three should match:
    • internal_header[$15] is $20/$30 for LoROM or $21/$31 for HiROM.
    • TV system is internal_header[$19] and should be less than $10.
    • internal_header[$1e] = internal_header[$1c] EOR $FF, and internal_header[$1f] = internal_header[$1d] EOR $FF.
    • The header contains a checksum of the entire ROM (subject to mirroring if the ROM is not a power of 2 bytes in size). But ROM hacks often fail this checksum especially when stacked, and ROM hacks are part of PowerPak's reason for existence, so just ignore it.
  • internal_header[$16] tells what components are on the board. Value $02 indicates a battery-backed PRG RAM and no coprocessor.
  • Size of PRG RAM is 1024 << internal_header[$18] bytes; this byte must be in range $01 through $05.

--Tepples 14:37, 27 March 2010 (UTC)