INES Mapper 180
From NESdev Wiki
Jump to navigationJump to search
INES Mapper 180 is used to represent a simple Nichibutsu board, its specific type name is unknown. Crazy Climber is the only game known to utilize this mapper. It is similar to UxROM but uses AND logic (74HC08) instead of OR logic (74HC32), producing a fixed first bank at $8000 rather than a fixed last bank at $C000.
Because APU DMC is usually restricted to $C000-$FFFF, this behavior might be useful for games with a lot of recorded speech. But like BNROM and AxROM, this configuration requires the 6502's vectors to sit in the last few bytes of each bank.
Overview
- PRG ROM size: 128 KB
- PRG ROM bank size: 16 KB
- PRG RAM: None
- CHR capacity: 8 KB RAM
- CHR bank size: Not bankswitched
- Nametable mirroring: Solder pads select vertical or horizontal mirroring
- Subject to bus conflicts: ?
Banks
- CPU $8000-$BFFF: 16 KB PRG ROM bank, fixed to the first bank
- CPU $C000-$FFFF: 16 KB switchable PRG ROM bank
Registers
Bank select ($8000-$FFFF)
7 bit 0 ---- ---- xxxx xPPP ||| +++-- Select 16 KB PRG ROM bank for CPU $C000-$FFFF