INES Mapper 015

From NESdev Wiki
Revision as of 17:10, 28 November 2009 by Tepples (talk | contribs) (→‎Variants: category tree maintenance)
Jump to navigationJump to search

The iNES format assigns iNES Mapper 015 as the mapper used in 100-in-1 Contra Function 16, the first pirate multicart to be emulated.

The mapper allows multiple NROM or BNROM games plus one UNROM game to be used with very little modification. A few games originally released on a CNROM compatible board (such as two variants of Tetris) showed up on the cart; these were ripped to NROM by tossing out all 8 KB CHR banks except the one used for gameplay.

Overview

  • PRG ROM size: Up to 512 KB
  • PRG ROM bank size: 8 KB, 16 KB, or 32 KB
  • PRG RAM: 8 KB
  • CHR capacity: 8 KB RAM
  • CHR bank size: None
  • Nametable mirroring: Controlled by mapper
  • Subject to bus conflicts: Unknown

Banks

There is one switchable bank. How this is mapped into depends on the current bank mode (see Registers below).

Bank mode 0 ( 32K )

  • CPU $8000-$BFFF: Bank B
  • CPU $C000-$FFFF: Bank (B OR 1)

If bit 0 of B equals 1, then bank modes 1 and 2 are identical.

Bank mode 1 ( 128K )

  • CPU $8000-$BFFF: Switchable 16 KB bank B
  • CPU $C000-$DFFF: Fixed to last bank in the cart

This mode uses the same configuration as UNROM.

Bank mode 2 ( 8K )

  • CPU $8000-$9FFF: Sub-bank b of 16 KB PRG ROM bank B
  • CPU $A000-$FFFF: Mirrors of $8000-$9FFF

Bank mode 3 ( 16K )

  • CPU $8000-$BFFF: 16 KB bank B
  • CPU $C000-$FFFF: Mirror of $8000-$BFFF

Registers

Control ($8000-$FFFF)

This is a 10-bit register. The upper 2 bits of the value are set from address lines A1-A0.

15 bit  8 7  bit  0  Address bus
---- ---- ---- ----
1xxx xxxx xxxx xxSS
|                ||
|                ++- Select PRG ROM bank mode
|                    0: 32K; 1: 128K (UNROM style); 2: 8K; 3: 16K
+------------------- Always 1

7  bit  0  Data bus
---- ----
bMBB BBBB
|||| ||||
||++-++++- Select 16 KB PRG ROM bank
|+-------- Select nametable mirroring mode (0=vertical; 1=horizontal)
+--------- Select 8 KB half of 16 KB PRG ROM bank
           (should be 0 except in bank mode 0)

The result when b=1 outside of bank mode 0 is not specified.

Power-up state: bank mode 2, bank 0, mirroring not specified.

Hardware

Variants