TKSROM: Difference between revisions

From NESdev Wiki
Jump to navigationJump to search
m (Created page with ''''TKSROM''' refers to a variant of the TKROM board with the VRAM mirroring signals routed through the CHR side of the Nintendo MMC3 a different way, as described in ...')
 
m (add cat:scanlineIRQ)
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
'''TKSROM''' refers to a variant of the [[TKROM]] board with the VRAM mirroring signals routed through the CHR side of the [[MM3|Nintendo MMC3]] a different way, as described in [[iNES Mapper 118]].
[[Category:Nintendo licensed mappers]][[Category:Mappers with scanline IRQs]]
'''TKSROM''' refers to a variant of the [[TKROM]] board with the VRAM mirroring signals routed through the CHR side of the [[MMC3|Nintendo MMC3]] a different way, as described in [[iNES Mapper 118]].
It is used only for the Japanese game ''Ys III: Wanderers from Ys''.


== Overview ==
== Overview ==

Latest revision as of 17:12, 18 May 2015

TKSROM refers to a variant of the TKROM board with the VRAM mirroring signals routed through the CHR side of the Nintendo MMC3 a different way, as described in iNES Mapper 118. It is used only for the Japanese game Ys III: Wanderers from Ys.

Overview

  • PRG ROM size: 128, 256 or 512 KB (DIP-28/32 Nintendo pinout)
  • PRG ROM bank size: 8 KB
  • PRG RAM: 8 KB with optional battery
  • CHR capacity: 128 KB ROM (DIP-32 Nintendo pinout)
  • CHR bank size: 1 KB and 2 KB
  • Nametable mirroring: Controlled by mapper, but in a nonstandard way (see Mapper 118).
  • Subject to bus conflicts: No

Solder Pad Config

To be added.