From NESdev Wiki
Jump to navigationJump to search

NINA-001 is a particular third-party cartridge board used by American Video Entertainment. The iNES format assigns mapper 34 to this board (as well as BxROM).


  • PRG ROM size: 64 KB
  • PRG ROM bank size: 32 KB
  • PRG RAM: 8 KB, not battery backed [1]
  • CHR ROM capacity: 64 KB ROM
  • CHR bank size: 4 KB
  • Nametable mirroring: hardwired to horizontal mirroring
  • Subject to bus conflicts: No


  • CPU $8000-$FFFF: 32 KB switchable PRG ROM bank
  • PPU $0000-$0FFF: 4 KB switchable CHR ROM bank
  • PPU $1000-$1FFF: 4 KB switchable CHR ROM bank


PRG bank select ($7FFD)

7  bit  0
---- ----
xxxx xxxP
        +- Select 32 KB PRG ROM bank for CPU $8000-$FFFF

CHR bank select 0 ($7FFE)

7  bit  0
---- ----
xxxx CCCC
     ++++- Select 4 KB CHR ROM bank for PPU $0000-$0FFF

CHR bank select 1 ($7FFF)

7  bit  0
---- ----
xxxx CCCC
     ++++- Select 4 KB CHR ROM bank for PPU $1000-$1FFF


The NINA-001 board contains a 74LS133 (13-input NAND gate), 74LS74 (dual D flip-flop), 74HCT139 (dual 1-4 decoder), 74LS00 (quad 2-input NAND gate), two 74HCT173s (4-bit tristate D flip-flop), as well as a microcontroller labelled NINA to act as a CIC defeat mechanism. These 4 registers reside "on top" of PRG RAM: each write to the register goes both to the register and to the RAM location at the same address. Thus, reading the register's address returns the last value written to the RAM, which is also the last value written to the register.

One 2-NAND and one half of the 74'139 together generate /RAMSEL. Another 2-NAND inverts that to form +RAMSEL. A third 2-NAND inverts R/W to produce +WR. The 13-NAND combines +RAMSEL, +WR, and A12…A2 to generate /REGSEL. The other half of the 74'139 uses /REGSEL, A1, and A0 to generate the latching signals for the three flip-flops.

The final 2-NAND inverts PPU A12. PPU A12 and PPU /A12 are fed to the two 74'173s /OE inputs, implementing a simple quad 1-of-2 multiplexer.

This hardware has a trivial oversize definition that supports 8 MiB PRG and 1 MiB CHR, made by replacing the three flip-flops with 74'374s.


The iNES mapper used to implement this mapper also includes a writable register at $8000-$FFFF for emulation of the BxROM boardset which has caused many headaches for NES emulator authors. Emulator developers should consider switching between NINA-001 emulation and BxROM emulation based on the amount of CHR (≥ 16KiB implies NINA-001; ≤ 8KiB implies BNROM).